PartsTable
Technical Data Sheet
Download PDF

GS530D5-1 — BUSHING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

GS530D5-1: BUSHING,SLEEVE.

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include flange_width: 0.0240 INCHES NOMINAL IN, overall_length: 0.2625 INCHES MINIMUM AND 0.2825 INCHES MAXIMUM IN, special_features: RIGHT SIDE OF FLANGE TAPERED 50 DEGREES, body_inside_diameter: 0.1120 INCHES NOMINAL IN, body_outside_diameter: 0.1670 INCHES MINIMUM AND 0.1690 INCHES MAXIMUM IN, flange_outside_diameter: 0.2240 INCHES MINIMUM AND 0.2290 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-133-9546, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GS530D5-1
NSN: 3120-01-133-9546
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
flange_width0.0240 INCHES NOMINAL IN
overall_length0.2625 INCHES MINIMUM AND 0.2825 INCHES MAXIMUM IN
special_featuresRIGHT SIDE OF FLANGE TAPERED 50 DEGREES
body_inside_diameter0.1120 INCHES NOMINAL IN
body_outside_diameter0.1670 INCHES MINIMUM AND 0.1690 INCHES MAXIMUM IN
flange_outside_diameter0.2240 INCHES MINIMUM AND 0.2290 INCHES MAXIMUM IN
NSN3120-01-133-9546
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: GS530D5-1 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE OUTSIDE DIAMETER: 0.2240 INCHES MINIMUM AND 0.2290 INCHES MAXIMUM IN
•
BODY OUTSIDE DIAMETER: 0.1670 INCHES MINIMUM AND 0.1690 INCHES MAXIMUM IN
•
BODY INSIDE DIAMETER: 0.1120 INCHES NOMINAL IN
•
FLANGE WIDTH: 0.0240 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FLANGE OUTSIDE DIAMETER0.2240 INCHES MINIMUM AND 0.2290 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER0.1670 INCHES MINIMUM AND 0.1690 INCHES MAXIMUM IN
OVERALL LENGTH0.2625 INCHES MINIMUM AND 0.2825 INCHES MAXIMUM IN
BODY INSIDE DIAMETER0.1120 INCHES NOMINAL IN
SPECIAL FEATURESRIGHT SIDE OF FLANGE TAPERED 50 DEGREES
FLANGE WIDTH0.0240 INCHES NOMINAL IN
OTHER ITEMS IN FSC 3120 — Bearings, Plain, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3120-00-001-1288 3120-00-001-1835 3120-00-001-1838 3120-00-001-1928 3120-00-001-1934 3120-00-001-3933 3120-00-001-3937 3120-00-001-3938
SUBSTITUTES & CROSS-REFERENCES 1
FD-N0158-001Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GS530D5-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GS530D5-1?
GS530D5-1 is a BUSHING,SLEEVE.
What parts can replace GS530D5-1?
There is 1 known substitute for GS530D5-1: FD-N0158-001. Substitute compatibility should be verified for your specific system.
What is the NSN for GS530D5-1?
GS530D5-1 is cataloged in the U.S. Government catalog under NSN 3120-01-133-9546. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GS530D5-1