PartsTable
Technical Data Sheet
Download PDF

GS500DG22A05D — STANDOFF,HINGED,THREADED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

GS500DG22A05D: STANDOFF,HINGED,THREADED.

The STANDOFF,HINGED,THREADED is a the manufacturer industrial component. Key specifications include length: 1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN, diameter: 0.250 INCHES NOMINAL IN, material: ALUMINUM ALLOY OVERALL, thread_class: 2B LEFT INTERNAL (INCLUDES THRU THREAD), thread_length: 0.375 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN, style_designator: HINGED, THREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-426-5397, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GS500DG22A05D
NSN: 5340-01-426-5397
FSC: 5340 — Hardware, Commercial
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
length1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN
diameter0.250 INCHES NOMINAL IN
materialALUMINUM ALLOY OVERALL
thread_class2B LEFT INTERNAL (INCLUDES THRU THREAD)
thread_length0.375 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
style_designatorHINGED, THREADED
thread_directionRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
surface_treatmentANODIZE OVERALL
nominal_thread_size0.138 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
cross-sectional_shapeROUND
thread_quantity_per_inch32 LEFT INTERNAL (INCLUDES THRU THREAD)
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) LEFT INTERNAL (INCLUDES THRU THREAD)
NSN5340-01-426-5397
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GS500DG22A05D MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.375 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
•
STYLE DESIGNATOR: HINGED, THREADED
•
DIAMETER: 0.250 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
TECHNICAL CHARACTERISTICS
LENGTH1.359 INCHES MINIMUM AND 1.391 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.375 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
THREAD LENGTH0.375 INCHES MINIMUM RIGHT INTERNAL IN
STYLE DESIGNATORHINGED, THREADED
DIAMETER0.250 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
THREAD DIRECTIONRIGHT-HAND RIGHT INTERNAL
NOMINAL THREAD SIZE0.138 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
NOMINAL THREAD SIZE0.138 INCHES RIGHT INTERNAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
17320-A-0632-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GS500DG22A05D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GS500DG22A05D?
GS500DG22A05D is a STANDOFF,HINGED,THREADED.
What parts can replace GS500DG22A05D?
There is 1 known substitute for GS500DG22A05D: 17320-A-0632-10. Substitute compatibility should be verified for your specific system.
What is the NSN for GS500DG22A05D?
GS500DG22A05D is cataloged in the U.S. Government catalog under NSN 5340-01-426-5397. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GS500DG22A05D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.