PartsTable
Technical Data Sheet
PartsTable / COMPONENT / GS10431&25
GS10431&25 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GS10431&25 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-770-9180, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GS10431&25
NSN: 5340-00-770-9180
FSC: 5340
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
Part NumberGS10431&25
NSN5340-00-770-9180
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GS10431&25 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH UNDER SHOULDER: 0.646 INCHES MINIMUM AND 0.666 INCHES MAXIMUM IN
•
OPEN END INSIDE DIAMETER: 1.207 INCHES MINIMUM AND 1.227 INCHES MAXIMUM IN
•
CLOSED END OVERALL DIAMETER: 1.140 INCHES MINIMUM AND 1.160 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
SPECIFICATION/STANDARD DATA: 80205-NAS816 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH UNDER SHOULDER0.646 INCHES MINIMUM AND 0.666 INCHES MAXIMUM IN
OPEN END INSIDE DIAMETER1.207 INCHES MINIMUM AND 1.227 INCHES MAXIMUM IN
CLOSED END OVERALL DIAMETER1.140 INCHES MINIMUM AND 1.160 INCHES MAXIMUM IN
MATERIALPLASTIC, POLYETHYLENE (PP)
SPECIFICATION/STANDARD DATA80205-NAS816 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
250Upgraded Successor
successor cross-reference
successor
MIL-H-37577Upgraded Successor
successor cross-reference
successor
003930Upgraded Successor
successor cross-reference
successor
89-80778-1Upgraded Successor
successor cross-reference
successor
89-80778-2Upgraded Successor
successor cross-reference
successor
NON24-326Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy GS10431&25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GS10431&25?
GS10431&25 is a GS10431&25.
What parts can replace GS10431&25?
There are 11 known substitutes for GS10431&25: 250, MIL-H-37577, 003930 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GS10431&25?
GS10431&25 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-770-9180. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GS10431&25

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026