PartsTable
Technical Data Sheet
Download PDF

GS1009B3-5 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

GS1009B3-5: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP H11 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.188 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN, head_diameter: 0.258 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-424-6045, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GS1009B3-5
NSN: 5305-01-424-6045
FSC: 5305 — Screws
CAGE: 1EM77 — B & B SPECIALTIES INC DBA GS AEROSPACE DIV GS AEROSPACE (USA)
SPECIFICATIONS
materialSTEEL COMP H11 OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.188 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
head_diameter0.258 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN
thread_length0.348 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
fastener_length0.660 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
hardness_rating46.0 ROCKWELL C MINIMUM AND 49.0 ROCKWELL C MAXIMUM OVERALL
special_featuresSURFACE TREATMENT IS ALSO DRY FILM LUBE
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
NSN5305-01-424-6045
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: GS1009B3-5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.660 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.348 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
•
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 49.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.660 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONNAS672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.348 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 49.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
GRIP DIAMETER0.188 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
C20645B3-5Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy GS1009B3-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GS1009B3-5?
GS1009B3-5 is a SCREW,CLOSE TOLERANCE.
What parts can replace GS1009B3-5?
There is 1 known substitute for GS1009B3-5: C20645B3-5. Substitute compatibility should be verified for your specific system.
What is the NSN for GS1009B3-5?
GS1009B3-5 is cataloged in the U.S. Government catalog under NSN 5305-01-424-6045. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GS1009B3-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.