PartsTable
Technical Data Sheet
Download PDF

GR831AE1 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

GR831AE1: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.112 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING BAND, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: PASSIVATE BAND, material_thickness: 0.040 INCHES NOMINAL IN, loop_inside_diameter: 1.485 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-067-3792, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GR831AE1
NSN: 5340-01-067-3792
FSC: 5340 — Hardware, Commercial
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
diameter0.112 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING BAND
tongue_hole_typeROUND, UNTHREADED
surface_treatmentPASSIVATE BAND
material_thickness0.040 INCHES NOMINAL IN
loop_inside_diameter1.485 INCHES MAXIMUM IN
integral_nut_type_and_quantity1 SELF-LOCKING EQUAL LENGTH TONGUES
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
NSN5340-01-067-3792
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GR831AE1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
•
DIAMETER: 0.112 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE BAND
•
INTEGRAL NUT TYPE AND QUANTITY: 1 SELF-LOCKING EQUAL LENGTH TONGUES
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL: STEEL CORROSION RESISTING BAND
•
LOOP INSIDE DIAMETER: 1.485 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
DIAMETER0.112 INCHES NOMINAL IN
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE BAND
INTEGRAL NUT TYPE AND QUANTITY1 SELF-LOCKING EQUAL LENGTH TONGUES
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIALSTEEL CORROSION RESISTING BAND
LOOP INSIDE DIAMETER1.485 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GR831AE1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GR831AE1?
GR831AE1 is a CLAMP,LOOP.
What is the NSN for GR831AE1?
GR831AE1 is cataloged in the U.S. Government catalog under NSN 5340-01-067-3792. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GR831AE1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.