GR501C4-2: RIVET,BLIND.
The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 400 OR NICKEL ALLOY R-405 SLEEVE, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, shank_style: SELF-PLUGGING MECHANICALLY LOCKED STEM, shank_diameter: 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN, shear_strength: 1020 SINGLE POUNDS PER SQUARE INCH. This part is cataloged in the U.S.
Government catalog under NSN 5320-00-959-4197, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | NICKEL ALLOY 400 OR NICKEL ALLOY R-405 SLEEVE |
| head_style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| grip_length | 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN |
| shank_style | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| shank_diameter | 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN |
| shear_strength | 1020 SINGLE POUNDS PER SQUARE INCH |
| fastener_length | 0.260 INCHES MAXIMUM IN |
| expansion_device | SERRATED STEM-TYPE W |
| countersink_angle | 98.5 DEGREES MINIMUM AND 101.5 DEGREES MAXIMUM |
| surface_treatment | PASSIVATE LOCKING RING |
| head_major_diameter | 0.211 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN |
| specification/standard_data | 80205-NAS1921 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| NSN | 5320-00-959-4197 |
| SHANK DIAMETER | 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM IN |
| FASTENER LENGTH | 0.260 INCHES MAXIMUM IN |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FOR A286 CRES ONLY FED SPEC SINGLE TREATMENT RESPONSE LOCKING RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281 FED SPEC ALL MATERIAL RESPONSES SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5737 ASSN STD 1ST MATERIAL RESPONSE OR QQ-N-281 FED SPEC 2ND MATERIAL RESPONSE OR QQ-N-281 FED SPEC 3RD MATERIAL RESPONSE LOCKING RING |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| SPECIFICATION/STANDARD DATA | 80205-NAS1921 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |