GR501AC3-3 — RIVET,BLIND

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

GR501AC3-3: RIVET,BLIND.

The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN, shank_style: PULL THROUGH HOLLOW SHANK, shank_diameter: 0.094 INCHES NOMINAL IN, fastener_length: 0.265 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-00-411-9439, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

GR501AC3-3

NSN: 5320-00-411-9439
FSC: 5320 — Rivets
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)

SPECIFICATIONS

material	STEEL OVERALL
head_style	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
grip_length	0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
shank_style	PULL THROUGH HOLLOW SHANK
shank_diameter	0.094 INCHES NOMINAL IN
fastener_length	0.265 INCHES NOMINAL IN
expansion_device	SERRATED STEM-TYPE W
countersink_angle	99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM
surface_treatment	CADMIUM OVERALL
head_major_diameter	0.183 INCHES NOMINAL IN
criticality_code_justification	FEAT
NSN	5320-00-411-9439

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.094 INCHES NOMINAL IN

•

FASTENER LENGTH: 0.265 INCHES NOMINAL IN

•

EXPANSION DEVICE: SERRATED STEM-TYPE W

•

CRITICALITY CODE JUSTIFICATION: FEAT

•

HEAD STYLE: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)

•

GRIP LENGTH: 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN

•

SHANK STYLE: PULL THROUGH HOLLOW SHANK

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.094 INCHES NOMINAL IN
FASTENER LENGTH	0.265 INCHES NOMINAL IN
EXPANSION DEVICE	SERRATED STEM-TYPE W
CRITICALITY CODE JUSTIFICATION	FEAT
HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
GRIP LENGTH	0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
SHANK STYLE	PULL THROUGH HOLLOW SHANK
SPECIAL FEATURES	THIS PART MEETS THE Y REQUIREMENTS DUE TO CRITICAL FEATURES, TOLERANCES, FIT RESTRICTIONS, MATERIAL PROPERTIES AND MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO WEAPON SYSTEM, DEATH OR SERIOUS INJURY
SURFACE TREATMENT	CADMIUM OVERALL
COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM

SUBSTITUTES & CROSS-REFERENCES 5

CCR264SS-3-3Reference document

Same NSN cross-reference

Reference document — Secondary reference

FON2-6394-3-3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

13220E5213-3Reference document

Same NSN cross-reference

Reference document — Secondary reference

BACR15DR3-3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

CCR264SS-3-03Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy GR501AC3-3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is GR501AC3-3?

GR501AC3-3 is a RIVET,BLIND.

What parts can replace GR501AC3-3?

There are 5 known substitutes for GR501AC3-3: CCR264SS-3-3, FON2-6394-3-3, 13220E5213-3 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for GR501AC3-3?

GR501AC3-3 is cataloged in the U.S. Government catalog under NSN 5320-00-411-9439. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

GR501AC3-3 — RIVET,BLIND

Request a Quote — GR501AC3-3