PartsTable
Technical Data Sheet
PartsTable / COMPONENT / GPW7245
GPW7245 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SETSCREW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1020 OVERALL, point_style: FLAT, point_length: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN, spline_width: 0.040 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN, thread_length: 0.241 INCHES MINIMUM IN, fastener_length: 0.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-360-8141, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GPW7245
NSN: 5305-00-360-8141
FSC: 5305
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)
SPECIFICATIONS
materialSTEEL COMP 1020 OVERALL
point_styleFLAT
point_length0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
spline_width0.040 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
thread_length0.241 INCHES MINIMUM IN
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
features_providedCASEHARDENED
point_chamfer_angle4.0 DEGREES NOMINAL
internal_drive_styleSIX SPLINE
spline_major_diameter0.185 INCHES NOMINAL IN
spline_minor_diameter0.158 INCHES NOMINAL IN
NSN5305-00-360-8141
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: GPW7245 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONSTANDARD THREAD PITCH DIAMETER: +0.2731 TO 0.2824 INCHES IN
•
POINT LENGTH: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1020 OVERALL
•
SPLINE WIDTH: 0.040 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
POINT STYLE: FLAT
•
INTERNAL DRIVE STYLE: SIX SPLINE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-631 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
NONSTANDARD THREAD PITCH DIAMETER+0.2731 TO 0.2824 INCHES IN
POINT LENGTH0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1020 OVERALL
SPLINE WIDTH0.040 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
POINT STYLEFLAT
INTERNAL DRIVE STYLESIX SPLINE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-630 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-631 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
FASTENER LENGTH0.625 INCHES NOMINAL IN
THREAD QUANTITY PER INCH24
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
636200Interchangeable
interchangeable cross-reference
interchangeable
6362Interchangeable
interchangeable cross-reference
interchangeable
7002601Interchangeable
Same NIIN cross-reference
interchangeable
4418MInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy GPW7245?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GPW7245?
GPW7245 is a SETSCREW.
What parts can replace GPW7245?
There are 4 known substitutes for GPW7245: 636200, 6362, 7002601 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GPW7245?
GPW7245 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-360-8141. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GPW7245

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026