PartsTable
Technical Data Sheet
PartsTable / COMPONENT / GPW5186
GPW5186 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,EYE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shank_length: 1.250 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.125 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, overall_length: 3.594 INCHES MINIMUM AND 3.938 INCHES MAXIMUM IN, special_features: EYE AT 30.0 DEG ANGLE FROM CENTERLINE OF BOLT SHANK. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-701-0531, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GPW5186
NSN: 5306-00-701-0531
FSC: 5306
CAGE: 57526 — FORD MOTOR COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shank_length1.250 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
thread_class2A A
thread_length0.125 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
overall_length3.594 INCHES MINIMUM AND 3.938 INCHES MAXIMUM IN
special_featuresEYE AT 30.0 DEG ANGLE FROM CENTERLINE OF BOLT SHANK
thread_directionRIGHT-HAND
eye_outside_width2.125 INCHES MINIMUM AND 2.375 INCHES MAXIMUM IN
shoulder_diameter1.0000 INCHES NOMINAL IN
surface_treatmentPHOSPHATE OR CADMIUM OVERALL
eye_stock_diameter0.437 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
shoulder_thickness0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
NSN5306-00-701-0531
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: GPW5186 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PHOSPHATE OR CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
EYE INSIDE DIAMETER: 1.250 INCHES NOMINAL IN
•
THREAD LENGTH: 0.125 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
EYE OUTSIDE WIDTH: 2.125 INCHES MINIMUM AND 2.375 INCHES MAXIMUM IN
•
SHOULDER THICKNESS: 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
DISTANCE FROM CENTER OF EYE TO SHANK END: 2.531 INCHES MINIMUM AND 2.875 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTPHOSPHATE OR CADMIUM OVERALL
MATERIALSTEEL OVERALL
EYE INSIDE DIAMETER1.250 INCHES NOMINAL IN
THREAD LENGTH0.125 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
OVERALL LENGTH3.594 INCHES MINIMUM AND 3.938 INCHES MAXIMUM IN
EYE OUTSIDE WIDTH2.125 INCHES MINIMUM AND 2.375 INCHES MAXIMUM IN
SHOULDER THICKNESS0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
DISTANCE FROM CENTER OF EYE TO SHANK END2.531 INCHES MINIMUM AND 2.875 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH13
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
7010-531Interchangeable
interchangeable cross-reference
interchangeable
Y7010-531Interchangeable
interchangeable cross-reference
interchangeable
DA6369PCADA6393Interchangeable
interchangeable cross-reference
interchangeable
A6393Interchangeable
interchangeable cross-reference
interchangeable
6393Interchangeable
interchangeable cross-reference
interchangeable
F600C220Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy GPW5186?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GPW5186?
GPW5186 is a BOLT,EYE.
What parts can replace GPW5186?
There are 16 known substitutes for GPW5186: 7010-531, Y7010-531, DA6369PCADA6393 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GPW5186?
GPW5186 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-701-0531. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GPW5186

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026