PartsTable
Technical Data Sheet
PartsTable / COMPONENT / GPW3320
GPW3320 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAT,BALL SOCKET is a the manufacturer industrial component. Key specifications include radius: 0.438 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN, material: STEEL, hole_diameter: 0.156 INCHES NOMINAL IN, overall_height: 0.220 INCHES NOMINAL IN, ball_seat_depth: 0.090 INCHES NOMINAL IN, outside_diameter: 0.855 INCHES MINIMUM AND 0.865 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-703-6567, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GPW3320
NSN: 5340-00-703-6567
FSC: 5340
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)
SPECIFICATIONS
radius0.438 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
materialSTEEL
hole_diameter0.156 INCHES NOMINAL IN
overall_height0.220 INCHES NOMINAL IN
ball_seat_depth0.090 INCHES NOMINAL IN
outside_diameter0.855 INCHES MINIMUM AND 0.865 INCHES MAXIMUM IN
style_designatorSEAT
NSN5340-00-703-6567
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GPW3320 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SEAT
•
BALL SEAT DEPTH: 0.090 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
OUTSIDE DIAMETER: 0.855 INCHES MINIMUM AND 0.865 INCHES MAXIMUM IN
•
RADIUS: 0.438 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.156 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSEAT
BALL SEAT DEPTH0.090 INCHES NOMINAL IN
MATERIALSTEEL
OUTSIDE DIAMETER0.855 INCHES MINIMUM AND 0.865 INCHES MAXIMUM IN
RADIUS0.438 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
HOLE DIAMETER0.156 INCHES NOMINAL IN
OVERALL HEIGHT0.220 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
352235Upgraded Successor
successor cross-reference
successor
23-1186Upgraded Successor
successor cross-reference
successor
7036567Interchangeable
Same NIIN cross-reference
interchangeable
S5069Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy GPW3320?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GPW3320?
GPW3320 is a SEAT,BALL SOCKET.
What parts can replace GPW3320?
There are 4 known substitutes for GPW3320: 352235, 23-1186, 7036567 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GPW3320?
GPW3320 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-703-6567. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GPW3320

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026