PartsTable
Technical Data Sheet
Download PDF

GPW3167 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

GPW3167: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, outside_diameter: 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 0.750 INCHES NOMINAL IN, cross-sectional_thickness: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, cross-sectional_shape_style: RECTANGULAR METAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-737-3101, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GPW3167
NSN: 5330-00-737-3101
FSC: 5330 — Packing and Gasket Materials
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
outside_diameter0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter0.750 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
cross-sectional_shape_styleRECTANGULAR METAL
NSN5330-00-737-3101
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GPW3167 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR METAL
•
OUTSIDE DIAMETER: 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLERECTANGULAR METAL
OUTSIDE DIAMETER0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM IN
APERTURE DIAMETER0.750 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
A858Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
17213Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy GPW3167?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GPW3167?
GPW3167 is a GASKET.
What parts can replace GPW3167?
There are 2 known substitutes for GPW3167: A858, 17213. Substitute compatibility should be verified for your specific system.
What is the NSN for GPW3167?
GPW3167 is cataloged in the U.S. Government catalog under NSN 5330-00-737-3101. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GPW3167