PartsTable
Technical Data Sheet
PartsTable / COMPONENT / GP7097
GP7097 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: CORK OVERALL, joint_type: SCARF-PERIPHERAL ONE SIDE, peripheral_diameter: 1.562 INCHES NOMINAL IN, center_hole_diameter: 1.000 INCHES NOMINAL IN, cross-sectional_height: 0.312 INCHES NOMINAL IN, cross-sectional_shape_style: SQUARE/RECTANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-298-6210, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GP7097
NSN: 5330-00-298-6210
FSC: 5330
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)
SPECIFICATIONS
materialCORK OVERALL
joint_typeSCARF-PERIPHERAL ONE SIDE
peripheral_diameter1.562 INCHES NOMINAL IN
center_hole_diameter1.000 INCHES NOMINAL IN
cross-sectional_height0.312 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
NSN5330-00-298-6210
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GP7097 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 1.562 INCHES NOMINAL IN
•
JOINT TYPE: SCARF-PERIPHERAL ONE SIDE
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
MATERIAL: CORK OVERALL
•
CENTER HOLE DIAMETER: 1.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER1.562 INCHES NOMINAL IN
JOINT TYPESCARF-PERIPHERAL ONE SIDE
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
MATERIALCORK OVERALL
CENTER HOLE DIAMETER1.000 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.312 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
MIL-F-3541BInterchangeable
interchangeable cross-reference
interchangeable
7338650Interchangeable
interchangeable cross-reference
interchangeable
AS35411Interchangeable
interchangeable cross-reference
interchangeable
21-653Interchangeable
interchangeable cross-reference
interchangeable
97-181-16SInterchangeable
interchangeable cross-reference
interchangeable
3477Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy GP7097?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GP7097?
GP7097 is a PACKING,PREFORMED.
What parts can replace GP7097?
There are 17 known substitutes for GP7097: MIL-F-3541B, 7338650, AS35411 and 14 more. Substitute compatibility should be verified for your specific system.
Is GP7097 still available?
GP7097 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GP7097

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026