PartsTable
Technical Data Sheet
PartsTable / COMPONENT / GP4035
GP4035 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 8.375 INCHES NOMINAL IN, aperture_width: 7.188 INCHES NOMINAL IN, overall_length: 9.125 INCHES NOMINAL IN, cross-sectional_thickness: 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-495-7074, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GP4035
NSN: 5330-00-495-7074
FSC: 5330
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)
SPECIFICATIONS
hole_diameter0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width8.375 INCHES NOMINAL IN
aperture_width7.188 INCHES NOMINAL IN
overall_length9.125 INCHES NOMINAL IN
cross-sectional_thickness0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
outside_edge_to_bolt_hole_center_distance_along_width0.375 INCHES NOMINAL IN
NSN5330-00-495-7074
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GP4035 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.375 INCHES NOMINAL IN
•
APERTURE WIDTH: 7.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
OVERALL LENGTH9.125 INCHES NOMINAL IN
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.375 INCHES NOMINAL IN
OVERALL WIDTH8.375 INCHES NOMINAL IN
APERTURE WIDTH7.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
1402961Interchangeable
interchangeable cross-reference
interchangeable
16409Interchangeable
interchangeable cross-reference
interchangeable
8332584Interchangeable
interchangeable cross-reference
interchangeable
144EX29Interchangeable
interchangeable cross-reference
interchangeable
665Interchangeable
interchangeable cross-reference
interchangeable
2CR440Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy GP4035?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GP4035?
GP4035 is a GASKET.
What parts can replace GP4035?
There are 25 known substitutes for GP4035: 1402961, 16409, 8332584 and 22 more. Substitute compatibility should be verified for your specific system.
Is GP4035 still available?
GP4035 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GP4035

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026