PartsTable
Technical Data Sheet
PartsTable / COMPONENT / GP4016
GP4016 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 8.750 INCHES NOMINAL IN, length: 9.125 INCHES NOMINAL IN, material: STEEL COMP 1010 OR STEEL COMP 1015, inside_angle: 15.0 DEGREES NOMINAL, hole_diameter: 0.344 INCHES NOMINAL IN, inside_diameter: 7.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-737-2842, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GP4016
NSN: 5340-00-737-2842
FSC: 5340
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)
SPECIFICATIONS
width8.750 INCHES NOMINAL IN
length9.125 INCHES NOMINAL IN
materialSTEEL COMP 1010 OR STEEL COMP 1015
inside_angle15.0 DEGREES NOMINAL
hole_diameter0.344 INCHES NOMINAL IN
inside_diameter7.062 INCHES NOMINAL IN
securing_device_typeTHREADED FASTENER
peripheral_shape_styleOVAL, MULTI HOLES
hole_quantity_along_width6
first_recess_inside_height2.562 INCHES NOMINAL IN
hole_quantity_along_length4
cross-sectional_shape_styleCIRCULAR RECESS
NSN5340-00-737-2842
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GP4016 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 8.750 INCHES NOMINAL IN
•
MOUNTING OPENING SHAPE STYLE: UNTHREADED HOLE
•
LENGTH: 9.125 INCHES NOMINAL IN
•
HOLE QUANTITY ALONG WIDTH: 6
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1015
•
INSIDE DIAMETER: 7.062 INCHES NOMINAL IN
•
FIRST RECESS INSIDE HEIGHT: 2.562 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.344 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH8.750 INCHES NOMINAL IN
MOUNTING OPENING SHAPE STYLEUNTHREADED HOLE
LENGTH9.125 INCHES NOMINAL IN
HOLE QUANTITY ALONG WIDTH6
MATERIALSTEEL COMP 1010 OR STEEL COMP 1015
INSIDE DIAMETER7.062 INCHES NOMINAL IN
FIRST RECESS INSIDE HEIGHT2.562 INCHES NOMINAL IN
HOLE DIAMETER0.344 INCHES NOMINAL IN
HOLE QUANTITY ALONG LENGTH4
SECURING DEVICE TYPETHREADED FASTENER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
16976Upgraded Successor
successor cross-reference
successor
610139Interchangeable
interchangeable cross-reference
interchangeable
A10231Interchangeable
interchangeable cross-reference
interchangeable
756-8621-003Interchangeable
interchangeable cross-reference
interchangeable
A781Interchangeable
interchangeable cross-reference
interchangeable
57-9152Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy GP4016?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GP4016?
GP4016 is a COVER,ACCESS.
What parts can replace GP4016?
There are 21 known substitutes for GP4016: 16976, 610139, A10231 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GP4016?
GP4016 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-737-2842. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GP4016

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026