PartsTable
Technical Data Sheet
PartsTable / COMPONENT / GP1107
GP1107 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,RIBBED NECK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1020 OVERALL, head_style: FLAT CHAMFER, rib_length: 0.423 INCHES NOMINAL IN, head_height: 0.156 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.813 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-737-5862, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GP1107
NSN: 5306-00-737-5862
FSC: 5306
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)
SPECIFICATIONS
materialSTEEL COMP 1020 OVERALL
head_styleFLAT CHAMFER
rib_length0.423 INCHES NOMINAL IN
head_height0.156 INCHES NOMINAL IN
thread_class2A A
head_diameter0.813 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
thread_length0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
fastener_length1.354 INCHES MINIMUM AND 1.359 INCHES MAXIMUM IN
special_features0.062 IN. BY 45 DEGREE CHAMFER ON THD END IN
thread_directionRIGHT-HAND
features_providedCASEHARDENED
rib_major_diameter0.613 INCHES MINIMUM AND 0.623 INCHES MAXIMUM IN
NSN5306-00-737-5862
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: GP1107 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1020 OVERALL
•
HEAD HEIGHT: 0.156 INCHES NOMINAL IN
•
HEAD STYLE: FLAT CHAMFER
•
RIB MAJOR DIAMETER: 0.613 INCHES MINIMUM AND 0.623 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1020 OVERALL
HEAD HEIGHT0.156 INCHES NOMINAL IN
HEAD STYLEFLAT CHAMFER
SPECIAL FEATURES0.062 IN. BY 45 DEGREE CHAMFER ON THD END IN
RIB MAJOR DIAMETER0.613 INCHES MINIMUM AND 0.623 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.500 INCHES IN
RIB LENGTH0.423 INCHES NOMINAL IN
THREAD QUANTITY PER INCH20
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
KSC809Interchangeable
interchangeable cross-reference
interchangeable
GGG-C-755Interchangeable
interchangeable cross-reference
interchangeable
189-809Interchangeable
interchangeable cross-reference
interchangeable
P1072Interchangeable
interchangeable cross-reference
interchangeable
203052Interchangeable
interchangeable cross-reference
interchangeable
B364Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy GP1107?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GP1107?
GP1107 is a BOLT,RIBBED NECK.
What parts can replace GP1107?
There are 21 known substitutes for GP1107: KSC809, GGG-C-755, 189-809 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GP1107?
GP1107 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-737-5862. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GP1107

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026