PartsTable
Technical Data Sheet
PartsTable / O-RING / GOV-060-024
GOV-060-024 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.984 INCHES MINIMUM AND 2.026 INCHES MAXIMUM IN, center_hole_diameter: 1.784 INCHES MINIMUM AND 1.814 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-167-5121, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GOV-060-024
NSN: 5331-00-167-5121
FSC: 5331 — O-RING
CAGE: 60506 — LUBRIQUIP INC DBA LUBRIQUIP, INC., A UNIT OF IDEX (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter1.984 INCHES MINIMUM AND 2.026 INCHES MAXIMUM IN
center_hole_diameter1.784 INCHES MINIMUM AND 1.814 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-167-5121
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GOV-060-024 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.984 INCHES MINIMUM AND 2.026 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.784 INCHES MINIMUM AND 1.814 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER FLUOROCARBON CLASS FPM
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.984 INCHES MINIMUM AND 2.026 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.784 INCHES MINIMUM AND 1.814 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
M 83248/1-130Interchangeable
interchangeable cross-reference
interchangeable
284732-0001 ITEM 65Interchangeable
interchangeable cross-reference
interchangeable
MS9388-133Interchangeable
interchangeable cross-reference
interchangeable
NSN SPECIFIC V-22 AE1107C ENGINEInterchangeable
interchangeable cross-reference
interchangeable
AS3209-133 AN ALTERNATE ITEMInterchangeable
interchangeable cross-reference
interchangeable
M83248/1-133Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy GOV-060-024?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GOV-060-024?
GOV-060-024 is a O-RING.
What parts can replace GOV-060-024?
There are 15 known substitutes for GOV-060-024: M 83248/1-130, 284732-0001 ITEM 65, MS9388-133 and 12 more. Substitute compatibility should be verified for your specific system.
Is GOV-060-024 still available?
GOV-060-024 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GOV-060-024

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026