PartsTable
Technical Data Sheet
Download PDF

GN515C1032S — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

GN515C1032S: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302, overall_width: 0.500 INCHES NOMINAL IN, overall_height: 0.172 INCHES NOMINAL IN, overall_length: 0.969 INCHES NOMINAL IN, style_designator: ANCHOR, surface_treatment: PASSIVATE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-515-9196, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GN515C1032S
NSN: 5340-00-515-9196
FSC: 5340 — Hardware, Commercial
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 302
overall_width0.500 INCHES NOMINAL IN
overall_height0.172 INCHES NOMINAL IN
overall_length0.969 INCHES NOMINAL IN
style_designatorANCHOR
surface_treatmentPASSIVATE
material_thickness0.035 INCHES NOMINAL IN
mounting_hole_diameter0.098 INCHES NOMINAL IN
width_between_cup_flats0.391 INCHES NOMINAL IN
material_document_and_classificationMIL-S-5059, COMP 302 MIL SPEC SINGLE MATERIAL RESPONSE
distance_between_mounting_hole_centers0.688 INCHES NOMINAL IN
center_to_center_distance_between_cup_and_mounting_hole0.344 INCHES NOMINAL IN
NSN5340-00-515-9196
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GN515C1032S MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 0.688 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANCHOR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059, COMP 302 MIL SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.098 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.035 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.172 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS0.688 INCHES NOMINAL IN
STYLE DESIGNATORANCHOR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059, COMP 302 MIL SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.098 INCHES NOMINAL IN
OVERALL LENGTH0.969 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.035 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE0.344 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
1-300-266-01Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy GN515C1032S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GN515C1032S?
GN515C1032S is a RETAINER,NUT AND BOLT.
What parts can replace GN515C1032S?
There is 1 known substitute for GN515C1032S: 1-300-266-01. Substitute compatibility should be verified for your specific system.
What is the NSN for GN515C1032S?
GN515C1032S is cataloged in the U.S. Government catalog under NSN 5340-00-515-9196. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GN515C1032S

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.