PartsTable
Technical Data Sheet
Download PDF

GN515A624 — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

GN515A624: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 0.781 INCHES NOMINAL IN, overall_height: 0.292 INCHES NOMINAL IN, overall_length: 1.281 INCHES NOMINAL IN, style_designator: ANCHOR, surface_treatment: CADMIUM. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-819-2815, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GN515A624
NSN: 5340-00-819-2815
FSC: 5340 — Hardware, Commercial
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL
overall_width0.781 INCHES NOMINAL IN
overall_height0.292 INCHES NOMINAL IN
overall_length1.281 INCHES NOMINAL IN
style_designatorANCHOR
surface_treatmentCADMIUM
material_thickness0.042 INCHES NOMINAL IN
mounting_hole_diameter0.130 INCHES NOMINAL IN
width_between_cup_flats0.500 INCHES NOMINAL IN
distance_between_mounting_hole_centers1.000 INCHES NOMINAL IN
center_to_center_distance_between_cup_and_mounting_hole0.500 INCHES NOMINAL IN
NSN5340-00-819-2815
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GN515A624 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANCHOR
•
MOUNTING HOLE DIAMETER: 0.130 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.042 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.292 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS1.000 INCHES NOMINAL IN
STYLE DESIGNATORANCHOR
MOUNTING HOLE DIAMETER0.130 INCHES NOMINAL IN
OVERALL LENGTH1.281 INCHES NOMINAL IN
OVERALL WIDTH0.781 INCHES NOMINAL IN
MATERIAL THICKNESS0.042 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE0.500 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 1
963109-3Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy GN515A624?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GN515A624?
GN515A624 is a RETAINER,NUT AND BOLT.
What parts can replace GN515A624?
There is 1 known substitute for GN515A624: 963109-3. Substitute compatibility should be verified for your specific system.
What is the NSN for GN515A624?
GN515A624 is cataloged in the U.S. Government catalog under NSN 5340-00-819-2815. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GN515A624

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.