PartsTable
Technical Data Sheet
Download PDF

GN512FV6 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

GN512FV6: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 8740 OVERALL, nut_style: SLEEVE, nut_length: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN, lubrication: SOLUBLE LUBRICANT, nut_diameter: 0.200 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-144-8237, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GN512FV6
NSN: 5310-00-144-8237
FSC: 5310 — Nuts and Washers
CAGE: 29666 — HUCK MFG CO (USA)
SPECIFICATIONS
materialSTEEL COMP 8740 OVERALL
nut_styleSLEEVE
nut_length0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
lubricationSOLUBLE LUBRICANT
nut_diameter0.200 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNF
flange_diameter0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
flange_thickness0.063 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
nominal_thread_size0.164 INCHES IN
NSN5310-00-144-8237
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: GN512FV6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: SOLUBLE LUBRICANT
•
FLANGE DIAMETER: 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
NUT LENGTH: 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY2,CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FLANGE THICKNESS: 0.063 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
LUBRICATIONSOLUBLE LUBRICANT
FLANGE DIAMETER0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
NUT LENGTH0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY2,CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
FLANGE THICKNESS0.063 INCHES NOMINAL IN
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
NUT DIAMETER0.200 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
2ASPP-S-DT6Reference document
Same NSN cross-reference
Reference document — Secondary reference
2ASPP-S-DT06Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy GN512FV6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GN512FV6?
GN512FV6 is a NUT,SLEEVE.
What parts can replace GN512FV6?
There are 2 known substitutes for GN512FV6: 2ASPP-S-DT6, 2ASPP-S-DT06. Substitute compatibility should be verified for your specific system.
What is the NSN for GN512FV6?
GN512FV6 is cataloged in the U.S. Government catalog under NSN 5310-00-144-8237. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GN512FV6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.