PartsTable
Technical Data Sheet
Download PDF

GN510L6 — NUT,PLAIN,SLOTTED,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

GN510L6: NUT,PLAIN,SLOTTED,HEXAGON.

The NUT,PLAIN,SLOTTED,HEXAGON is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY OVERALL, nut_style: SLOTTED, HEXAGON, nut_height: 0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN, temp_rating: 750.0 FAHRENHEIT NOMINAL DEGF, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-046-7949, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GN510L6
NSN: 5310-00-046-7949
FSC: 5310 — Nuts and Washers
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialTITANIUM ALLOY OVERALL
nut_styleSLOTTED, HEXAGON
nut_height0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
temp_rating750.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
thread_directionRIGHT-HAND
width_across_flats0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN
nominal_thread_size0.375 INCHES IN
bearing_surface_typeWASHER FACED
bearing_surface_finish125.0 MICROINCHES
thread_quantity_per_inch24
NSN5310-00-046-7949
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: GN510L6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN
•
BEARING SURFACE FINISH: 125.0 MICROINCHES
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
TEMP RATING: 750.0 FAHRENHEIT NOMINAL DEGF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
NUT HEIGHT: 0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN
BEARING SURFACE FINISH125.0 MICROINCHES
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
TEMP RATING750.0 FAHRENHEIT NOMINAL DEGF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
NUT HEIGHT0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
NUT STYLESLOTTED, HEXAGON
THREAD CLASS3B
SUBSTITUTES & CROSS-REFERENCES 1
65290-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GN510L6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GN510L6?
GN510L6 is a NUT,PLAIN,SLOTTED,HEXAGON.
What parts can replace GN510L6?
There is 1 known substitute for GN510L6: 65290-6. Substitute compatibility should be verified for your specific system.
What is the NSN for GN510L6?
GN510L6 is cataloged in the U.S. Government catalog under NSN 5310-00-046-7949. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GN510L6