PartsTable
Technical Data Sheet
Download PDF

GN10FG-32 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

GN10FG-32: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, nut_style: ROUND, nut_diameter: 2.500 INCHES NOMINAL IN, thread_class: 3B, nut_thickness: 0.344 INCHES NOMINAL IN, thread_series: UN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-370-8701, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GN10FG-32
NSN: 5310-00-370-8701
FSC: 5310 — Nuts and Washers
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
nut_styleROUND
nut_diameter2.500 INCHES NOMINAL IN
thread_class3B
nut_thickness0.344 INCHES NOMINAL IN
thread_seriesUN
thread_directionRIGHT-HAND
drive_point_depth0.120 INCHES NOMINAL IN
drive_point_width0.190 INCHES NOMINAL IN
surface_treatmentANODIZE OVERALL
nominal_thread_size2.000 INCHES IN
drive_point_quantity2
NSN5310-00-370-8701
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: GN10FG-32 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B241 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DRIVE POINT WIDTH: 0.190 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 2.000 INCHES IN
•
NUT DIAMETER: 2.500 INCHES NOMINAL IN
•
DRIVE POINT DEPTH: 0.120 INCHES NOMINAL IN
•
NUT THICKNESS: 0.344 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B241 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DRIVE POINT WIDTH0.190 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE2.000 INCHES IN
NUT DIAMETER2.500 INCHES NOMINAL IN
DRIVE POINT DEPTH0.120 INCHES NOMINAL IN
NUT THICKNESS0.344 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE OVERALL
DRIVE POINT QUANTITY2
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
G371-32Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GN10FG-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GN10FG-32?
GN10FG-32 is a NUT,PLAIN,ROUND.
What parts can replace GN10FG-32?
There is 1 known substitute for GN10FG-32: G371-32. Substitute compatibility should be verified for your specific system.
What is the NSN for GN10FG-32?
GN10FG-32 is cataloged in the U.S. Government catalog under NSN 5310-00-370-8701. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GN10FG-32

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.