PartsTable / COMPONENT / GMP3-222
GMP3-222
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, hole_diameter: 0.594 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 11.375 INCHES NOMINAL IN, aperture_width: 9.156 INCHES NOMINAL IN, overall_length: 12.313 INCHES NOMINAL IN, aperture_length: 10.453 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-358-9807, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
GMP3-222
NSN: 5330-00-358-9807 FSC: 5330 CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material CELLULOSE OVERALL hole_diameter 0.594 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN overall_width 11.375 INCHES NOMINAL IN aperture_width 9.156 INCHES NOMINAL IN overall_length 12.313 INCHES NOMINAL IN aperture_length 10.453 INCHES NOMINAL IN cross-sectional_thickness 0.010 INCHES NOMINAL IN cross-sectional_shape_style SOLID SINGLE OR COMPOSITION NSN 5330-00-358-9807
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: GMP3-222
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• HOLE DIAMETER: 0.594 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
• CROSS-SECTIONAL THICKNESS: 0.010 INCHES NOMINAL IN
• APERTURE LENGTH: 10.453 INCHES NOMINAL IN
• MATERIAL: CELLULOSE OVERALL
• APERTURE WIDTH: 9.156 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION HOLE DIAMETER 0.594 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN CROSS-SECTIONAL THICKNESS 0.010 INCHES NOMINAL IN APERTURE LENGTH 10.453 INCHES NOMINAL IN OVERALL LENGTH 12.313 INCHES NOMINAL IN OVERALL WIDTH 11.375 INCHES NOMINAL IN MATERIAL CELLULOSE OVERALL APERTURE WIDTH 9.156 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
119546 Interchangeable interchangeable cross-reference
interchangeable
101-330 Interchangeable interchangeable cross-reference
interchangeable
17619 Interchangeable interchangeable cross-reference
interchangeable
2629-41 Interchangeable interchangeable cross-reference
interchangeable
376MAY1 Interchangeable Same NIIN cross-reference
interchangeable
2802-Z-598 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy GMP3-222?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GMP3-222?
GMP3-222 is a GASKET.
What parts can replace GMP3-222?
There are 10 known substitutes for GMP3-222: 119546, 101-330, 17619 and 7 more. Substitute compatibility should be verified for your specific system.
Is GMP3-222 still available?
GMP3-222 is currently cancelled.
Request a Quote — GMP3-222