PartsTable
Technical Data Sheet
Download PDF

GMCW139057 — BEARING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

GMCW139057: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: SILVER INNER LAYER, corner_shape: SQUARE OUTSIDE RIGHT CORNER, flange_width: 0.1140 INCHES MINIMUM AND 0.1160 INCHES MAXIMUM IN, hole_diameter: 0.1200 INCHES NOMINAL FIRST IN, overall_length: 1.3050 INCHES NOMINAL IN, style_designator: SOLID, EXTERNAL FLANGE ONE END. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-662-0397, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GMCW139057
NSN: 3120-00-662-0397
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 16462 — GENERAL MANUFACTURING CORP (USA)
SPECIFICATIONS
materialSILVER INNER LAYER
corner_shapeSQUARE OUTSIDE RIGHT CORNER
flange_width0.1140 INCHES MINIMUM AND 0.1160 INCHES MAXIMUM IN
hole_diameter0.1200 INCHES NOMINAL FIRST IN
overall_length1.3050 INCHES NOMINAL IN
style_designatorSOLID, EXTERNAL FLANGE ONE END
body_inside_diameter1.2425 INCHES MINIMUM AND 1.2475 INCHES MAXIMUM IN
body_outside_diameter1.5020 INCHES MINIMUM AND 1.5030 INCHES MAXIMUM IN
flange_outside_diameter1.9200 INCHES MINIMUM AND 1.9400 INCHES MAXIMUM IN
lubricant_accommodation_styleGROOVED STRAIGHT AND CIRCULAR
antirotation/lubrication_type_and_quantity4 HOLE
NSN3120-00-662-0397
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: GMCW139057 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE INSIDE RIGHT CORNER
•
FLANGE OUTSIDE DIAMETER: 1.9200 INCHES MINIMUM AND 1.9400 INCHES MAXIMUM IN
•
BODY OUTSIDE DIAMETER: 1.5020 INCHES MINIMUM AND 1.5030 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPECHAMFERED OUTSIDE LEFT CORNER
FLANGE OUTSIDE DIAMETER1.9200 INCHES MINIMUM AND 1.9400 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER1.5020 INCHES MINIMUM AND 1.5030 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
OVERALL LENGTH1.3050 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
139057Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GMCW139057?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GMCW139057?
GMCW139057 is a BEARING,SLEEVE.
What parts can replace GMCW139057?
There is 1 known substitute for GMCW139057: 139057. Substitute compatibility should be verified for your specific system.
What is the NSN for GMCW139057?
GMCW139057 is cataloged in the U.S. Government catalog under NSN 3120-00-662-0397. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GMCW139057