PartsTable
Technical Data Sheet
Download PDF

GMA84326 — STUD ASSEMBLY,TURNLOCK FASTENER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

GMA84326: STUD ASSEMBLY,TURNLOCK FASTENER.

STUD ASSEMBLY,TURNLOCK FASTENER. Key specifications include diameter: 0.585 INCHES NOMINAL IN, material: STEEL OVERALL, eyelet_length: 0.332 INCHES NOMINAL IN, special_features: KNURLED HEAD, stud_head_height: 0.550 INCHES NOMINAL IN, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-792-2323, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GMA84326
NSN: 5325-00-792-2323
FSC: 5325 — Fastening Devices
CAGE: K4787 — MINISTRY OF DEFENCE (PROCUREMENT EXECUTIVE) (GBR)
SPECIFICATIONS
diameter0.585 INCHES NOMINAL IN
materialSTEEL OVERALL
eyelet_length0.332 INCHES NOMINAL IN
special_featuresKNURLED HEAD
stud_head_height0.550 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
stud_assembly_styleSTUD ASSEMBLY
securing_device_typeWASHER
eyelet_outside_diameter0.247 INCHES NOMINAL IN
material_accommodated_thickness0.120 INCHES MINIMUM AND 0.179 INCHES MAXIMUM IN
surface_treatment_document_and_classificationQQ-P-416,TY 1,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
distance_from_engaging_member_to_largest_bearing_surface_of_head0.670 INCHES NOMINAL IN
NSN5325-00-792-2323
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: GMA84326 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
EYELET OUTSIDE DIAMETER: 0.247 INCHES NOMINAL IN
•
MATERIAL ACCOMMODATED THICKNESS: 0.120 INCHES MINIMUM AND 0.179 INCHES MAXIMUM IN
•
DIAMETER: 0.585 INCHES NOMINAL IN
•
STUD HEAD HEIGHT: 0.550 INCHES NOMINAL IN
•
SECURING DEVICE TYPE: WASHER
•
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD: 0.670 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
EYELET OUTSIDE DIAMETER0.247 INCHES NOMINAL IN
MATERIAL ACCOMMODATED THICKNESS0.120 INCHES MINIMUM AND 0.179 INCHES MAXIMUM IN
DIAMETER0.585 INCHES NOMINAL IN
STUD HEAD HEIGHT0.550 INCHES NOMINAL IN
SECURING DEVICE TYPEWASHER
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD0.670 INCHES NOMINAL IN
SPECIAL FEATURESKNURLED HEAD
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5325 — Fastening Devices
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5325-00-000-1884 5325-00-000-9988 5325-00-001-1567 5325-00-001-2043 5325-00-001-3842 5325-00-001-3858 5325-00-001-3871 5325-00-001-4317
SUBSTITUTES & CROSS-REFERENCES 6
26S34-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
5325PL0944783Reference document
Same NSN cross-reference
Reference document — Informative reference only
5L3741-004-05Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
99034631Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10071523Reference document
Same NSN cross-reference
Reference document — Informative reference only
5LV3741-004-05Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GMA84326?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GMA84326?
GMA84326 is a STUD ASSEMBLY,TURNLOCK FASTENER.
What parts can replace GMA84326?
There are 6 known substitutes for GMA84326: 26S34-5, 5325PL0944783, 5L3741-004-05 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GMA84326?
GMA84326 is cataloged in the U.S. Government catalog under NSN 5325-00-792-2323. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GMA84326

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.