PartsTable
Technical Data Sheet
PartsTable / COMPONENT / GM5150059
GM5150059 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE OVERALL, overall_width: 7.250 INCHES NOMINAL IN, aperture_diameter: 5.438 INCHES NOMINAL IN, bolt_circle_diameter: 6.375 INCHES NOMINAL IN, outside_corner_radius: 0.562 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-620-7359, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GM5150059
NSN: 5330-00-620-7359
FSC: 5330
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialPAPER AND GLUE OVERALL
overall_width7.250 INCHES NOMINAL IN
aperture_diameter5.438 INCHES NOMINAL IN
bolt_circle_diameter6.375 INCHES NOMINAL IN
outside_corner_radius0.562 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center3.625 INCHES NOMINAL IN
material_document_and_classificationMIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-620-7359
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GM5150059 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE CORNER RADIUS: 0.562 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 6.375 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
SIDE RADIUS FROM GASKET CENTER: 3.625 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
APERTURE DIAMETER: 5.438 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH7.250 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.562 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER6.375 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
SIDE RADIUS FROM GASKET CENTER3.625 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
APERTURE DIAMETER5.438 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
MATERIALPAPER AND GLUE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
511706-1Interchangeable
interchangeable cross-reference
interchangeable
31789Interchangeable
interchangeable cross-reference
interchangeable
70RX88Interchangeable
interchangeable cross-reference
interchangeable
88438HInterchangeable
interchangeable cross-reference
interchangeable
CS4730-0121-A-03-GLPQInterchangeable
interchangeable cross-reference
interchangeable
MIL-F-1183Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy GM5150059?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GM5150059?
GM5150059 is a GASKET.
What parts can replace GM5150059?
There are 11 known substitutes for GM5150059: 511706-1, 31789, 70RX88 and 8 more. Substitute compatibility should be verified for your specific system.
Is GM5150059 still available?
GM5150059 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GM5150059

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026