PartsTable
Technical Data Sheet
Download PDF

GL510AR3-16 — CATCH,FLUSH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

GL510AR3-16: CATCH,FLUSH.

The CATCH,FLUSH is a the manufacturer industrial component. Key specifications include width: 1.650 INCHES NOMINAL IN, length: 2.720 INCHES NOMINAL IN, material: UNABLE TO DECODE, special_features: MATL:LEVER BUTTON STEEL,BRACKET STEEL;BRACKET AND LEVER BUTTON PASSIVATED, style_designator: BUTTON ACTUATOR, surface_treatment: UNABLE TO DECODE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-045-7117, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GL510AR3-16
NSN: 5340-01-045-7117
FSC: 5340 — Hardware, Commercial
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
width1.650 INCHES NOMINAL IN
length2.720 INCHES NOMINAL IN
materialUNABLE TO DECODE
special_featuresMATL:LEVER BUTTON STEEL,BRACKET STEEL;BRACKET AND LEVER BUTTON PASSIVATED
style_designatorBUTTON ACTUATOR
surface_treatmentUNABLE TO DECODE
bolt_offset_distance0.160 INCHES NOMINAL IN
lever_offset_distance0.071 INCHES NOMINAL IN
mounting_hole_diameter0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
specification/standard_data26512-GL510AU MANUFACTURERS SPECIFICATION
center_to_center_distance_between_mounting_holes_along_width1.200 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_length2.190 INCHES NOMINAL IN
NSN5340-01-045-7117
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GL510AR3-16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT OFFSET DISTANCE: 0.160 INCHES NOMINAL IN
•
LENGTH: 2.720 INCHES NOMINAL IN
•
LEVER OFFSET DISTANCE: 0.071 INCHES NOMINAL IN
•
STYLE DESIGNATOR: BUTTON ACTUATOR
•
MOUNTING HOLE DIAMETER: 0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 1.200 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 26512-GL510AU MANUFACTURERS SPECIFICATION
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 2.190 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
BOLT OFFSET DISTANCE0.160 INCHES NOMINAL IN
LENGTH2.720 INCHES NOMINAL IN
LEVER OFFSET DISTANCE0.071 INCHES NOMINAL IN
STYLE DESIGNATORBUTTON ACTUATOR
MOUNTING HOLE DIAMETER0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH1.200 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA26512-GL510AU MANUFACTURERS SPECIFICATION
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH2.190 INCHES NOMINAL IN
SPECIAL FEATURESMATL:LEVER BUTTON STEEL,BRACKET STEEL;BRACKET AND LEVER BUTTON PASSIVATED
SURFACE TREATMENTUNABLE TO DECODE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GL510AR3-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GL510AR3-16?
GL510AR3-16 is a CATCH,FLUSH.
What is the NSN for GL510AR3-16?
GL510AR3-16 is cataloged in the U.S. Government catalog under NSN 5340-01-045-7117. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GL510AR3-16

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.