PartsTable
Technical Data Sheet
Download PDF

GJH1110 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

GJH1110: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.6873 INCHES MINIMUM AND 0.6876 INCHES MAXIMUM IN, overall_width: 0.6150 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN, alignment_type: RIGID, special_features: GROUND OD, style_designator: NON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-007-2924, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GJH1110
NSN: 3110-00-007-2924
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.6873 INCHES MINIMUM AND 0.6876 INCHES MAXIMUM IN
overall_width0.6150 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
alignment_typeRIGID
special_featuresGROUND OD
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
bearing_seal_typeCONTACT
lubrication_materialLUBRICANT
overall_outside_diameter0.9323 INCHES MINIMUM AND 0.9325 INCHES MAXIMUM IN
NSN3110-00-007-2924
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: GJH1110 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL: LUBRICANT
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
•
OVERALL OUTSIDE DIAMETER: 0.9323 INCHES MINIMUM AND 0.9325 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
BORE DIAMETER: 0.6873 INCHES MINIMUM AND 0.6876 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPECONTACT
LUBRICATION MATERIALLUBRICANT
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
OVERALL WIDTH0.6150 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.9323 INCHES MINIMUM AND 0.9325 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESGROUND OD
BORE DIAMETER0.6873 INCHES MINIMUM AND 0.6876 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
135184Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GJH1110?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GJH1110?
GJH1110 is a BEARING,ROLLER,NEEDLE.
What parts can replace GJH1110?
There is 1 known substitute for GJH1110: 135184. Substitute compatibility should be verified for your specific system.
What is the NSN for GJH1110?
GJH1110 is cataloged in the U.S. Government catalog under NSN 3110-00-007-2924. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GJH1110