PartsTable
Technical Data Sheet
PartsTable / COMPONENT / GIM-10329-34
GIM-10329-34 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, connection_type: THREADED EXTERNAL PIPE FIRST END, inside_diameter: 1.000 INCHES NOMINAL IN, connection_style: PLAIN FIRST END, outside_diameter: 1.625 INCHES NOMINAL IN, thread_direction: RIGHT-HAND FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-022-4446, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GIM-10329-34
NSN: 4720-01-022-4446
FSC: 4720
CAGE: 61125 — ECHELON SUPPLY AND SERVICE, INC. (USA)
SPECIFICATIONS
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
connection_typeTHREADED EXTERNAL PIPE FIRST END
inside_diameter1.000 INCHES NOMINAL IN
connection_stylePLAIN FIRST END
outside_diameter1.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
operating_pressure250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure1000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size1.000 INCHES FIRST END IN
end_connection_designSTRAIGHT FIRST END
inside_surface_conditionSMOOTH
media_for_which_designedHYDRAULIC FLUID, WATER BASE AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE
NSN4720-01-022-4446
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: GIM-10329-34 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONNECTION STYLE: PLAIN FIRST END
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
MEDIA FOR WHICH DESIGNED: HYDRAULIC FLUID, WATER BASE AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE
•
OUTER COVERING ENVIRONMENTAL PROTECTION: OIL RESISTANT AND WEATHERPROOF
•
OUTSIDE DIAMETER: 1.625 INCHES NOMINAL IN
•
HYDROSTATIC TEST PRESSURE: 500.0 POUNDS PER SQUARE INCH LBS
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
INSIDE DIAMETER: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CONNECTION STYLEPLAIN FIRST END
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
MEDIA FOR WHICH DESIGNEDHYDRAULIC FLUID, WATER BASE AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE
OUTER COVERING ENVIRONMENTAL PROTECTIONOIL RESISTANT AND WEATHERPROOF
OUTSIDE DIAMETER1.625 INCHES NOMINAL IN
HYDROSTATIC TEST PRESSURE500.0 POUNDS PER SQUARE INCH LBS
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
INSIDE DIAMETER1.000 INCHES NOMINAL IN
OPERATING PRESSURE250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
INSIDE SURFACE CONDITIONSMOOTH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
10329Interchangeable
interchangeable cross-reference
interchangeable
380135-S43Interchangeable
interchangeable cross-reference
interchangeable
MS51922-37Interchangeable
interchangeable cross-reference
interchangeable
WWF12C19-710SInterchangeable
interchangeable cross-reference
interchangeable
AT35245Interchangeable
interchangeable cross-reference
interchangeable
1-7298-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy GIM-10329-34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GIM-10329-34?
GIM-10329-34 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace GIM-10329-34?
There are 18 known substitutes for GIM-10329-34: 10329, 380135-S43, MS51922-37 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GIM-10329-34?
GIM-10329-34 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-022-4446. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GIM-10329-34

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026