PartsTable
Technical Data Sheet
PartsTable / COMPONENT / GIB66108
GIB66108 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND RUBBER SYNTHETIC OVERALL, hole_diameter: 0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION, side_radius_from_gasket_center: 3.250 INCHES NOMINAL IN, material_document_and_classification: HH-P-96,CL A FED SPEC ALL MATERIAL RESPONSES OVERALL, center_to_center_distance_between_bolt_holes_along_width: 6.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-048-1173, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GIB66108
NSN: 5330-01-048-1173
FSC: 5330
CAGE: 24930 — L3HARRIS TECHNOLOGIES, INC DIV SPACE & AIRBORNE SYSTEMS (USA)
SPECIFICATIONS
materialPAPER AND RUBBER SYNTHETIC OVERALL
hole_diameter0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
bolt_hole_quantity7
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center3.250 INCHES NOMINAL IN
material_document_and_classificationHH-P-96,CL A FED SPEC ALL MATERIAL RESPONSES OVERALL
center_to_center_distance_between_bolt_holes_along_width6.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length3.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-048-1173
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GIB66108 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT HOLE QUANTITY: 7
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
SIDE RADIUS FROM GASKET CENTER: 3.250 INCHES NOMINAL IN
•
MATERIAL: PAPER AND RUBBER SYNTHETIC OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HOLE DIAMETER: 0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96,CL A FED SPEC ALL MATERIAL RESPONSES OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 6.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
BOLT HOLE QUANTITY7
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SIDE RADIUS FROM GASKET CENTER3.250 INCHES NOMINAL IN
MATERIALPAPER AND RUBBER SYNTHETIC OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HOLE DIAMETER0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96,CL A FED SPEC ALL MATERIAL RESPONSES OVERALL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH6.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
10-8SA6Interchangeable
interchangeable cross-reference
interchangeable
10-8BCACInterchangeable
interchangeable cross-reference
interchangeable
3009194Interchangeable
interchangeable cross-reference
interchangeable
66108Interchangeable
interchangeable cross-reference
interchangeable
714MEAAFLZInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy GIB66108?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GIB66108?
GIB66108 is a GASKET.
What parts can replace GIB66108?
There are 5 known substitutes for GIB66108: 10-8SA6, 10-8BCAC, 3009194 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GIB66108?
GIB66108 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-048-1173. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GIB66108

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026