GH511FA3E380E — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited

— · PIPE SECTION

PRODUCT OVERVIEW

GH511FA3E380E: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES SECOND END, seat_angle: 37.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.250 INCHES NOMINAL IN, connection_style: SWIVEL NUT FLARE SECOND END. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-490-4033, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

GH511FA3E380E

NSN: 4720-01-490-4033
FSC: 4720 — Hose and Flexible Tubing
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)

SPECIFICATIONS

flow_angle	90.0 DEGREES SECOND END
seat_angle	37.0 DEGREES FIRST END
temp_rating	-65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF
connection_type	THREADED INTERNAL TUBE FIRST END
inside_diameter	0.250 INCHES NOMINAL IN
connection_style	SWIVEL NUT FLARE SECOND END
outside_diameter	0.460 INCHES NOMINAL IN
special_features	ANODIZE PER MIL-A-8625
operating_pressure	300.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
end_connection_design	STRAIGHT FIRST END
end_item_identification	F-22 AIRCRAFT
inside_surface_condition	CONVOLUTED
NSN	4720-01-490-4033

COMPONENT DIAGRAM

KEY FEATURES

•

FLOW ANGLE: 90.0 DEGREES SECOND END

•

MEASURING METHOD AND LENGTH: 38.000 INCHES NOMINAL WORKING IN

•

TEMP RATING: -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF

•

MINIMUM INSIDE BENDING RADIUS: 1.250 INCHES IN

•

CONNECTION STYLE: SWIVEL NUT FLARE SECOND END

•

END CONNECTION DESIGN: ELBOW SECOND END

TECHNICAL CHARACTERISTICS

FLOW ANGLE	90.0 DEGREES SECOND END
MEASURING METHOD AND LENGTH	38.000 INCHES NOMINAL WORKING IN
TEMP RATING	-65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS	1.250 INCHES IN
CONNECTION STYLE	SWIVEL NUT FLARE SECOND END
CONNECTION STYLE	SWIVEL NUT FLARE FIRST END
END CONNECTION DESIGN	ELBOW SECOND END
END CONNECTION DESIGN	STRAIGHT FIRST END
LAYER COMPOSITION AND LOCATION	OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
CONNECTION TYPE	THREADED INTERNAL TUBE FIRST END

OTHER ITEMS IN FSC 4720 — Hose and Flexible Tubing

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

4720-00-000-0080 4720-00-000-0081 4720-00-000-0084 4720-00-000-0724 4720-00-001-0014 4720-00-001-0015 4720-00-001-0023 4720-00-001-0025

SUBSTITUTES & CROSS-REFERENCES 1

4100FA3E380EReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy GH511FA3E380E?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is GH511FA3E380E?

GH511FA3E380E is a HOSE ASSEMBLY,NONMETALLIC.

What parts can replace GH511FA3E380E?

There is 1 known substitute for GH511FA3E380E: 4100FA3E380E. Substitute compatibility should be verified for your specific system.

What is the NSN for GH511FA3E380E?

GH511FA3E380E is cataloged in the U.S. Government catalog under NSN 4720-01-490-4033. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

GH511FA3E380E — HOSE ASSEMBLY,NONMETALLIC

Request a Quote — GH511FA3E380E