PartsTable
Technical Data Sheet
Download PDF

GH15A33 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

GH15A33: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.500 INCHES NOMINAL IN, diameter: 0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN, corner_radius: 0.020 INCHES NOMINAL IN, flange_diameter: 0.625 INCHES NOMINAL IN, flange_thickness: 0.120 INCHES NOMINAL IN, style_designator: FLANGED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-024-7162, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GH15A33
NSN: 5340-01-024-7162
FSC: 5340 — Hardware, Commercial
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
length0.500 INCHES NOMINAL IN
diameter0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
corner_radius0.020 INCHES NOMINAL IN
flange_diameter0.625 INCHES NOMINAL IN
flange_thickness0.120 INCHES NOMINAL IN
style_designatorFLANGED
cross-sectional_shapeROUND
distance_from_centerline_to_flat0.250 INCHES NOMINAL IN
distance_from_centerline_to_second_flat0.250 INCHES NOMINAL IN
NSN5340-01-024-7162
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GH15A33 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 0.625 INCHES NOMINAL IN
•
CORNER RADIUS: 0.020 INCHES NOMINAL IN
•
LENGTH: 0.500 INCHES NOMINAL IN
•
DISTANCE FROM CENTERLINE TO FLAT: 0.250 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.120 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLANGED
•
DIAMETER: 0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
•
DISTANCE FROM CENTERLINE TO SECOND FLAT: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER0.625 INCHES NOMINAL IN
CORNER RADIUS0.020 INCHES NOMINAL IN
LENGTH0.500 INCHES NOMINAL IN
DISTANCE FROM CENTERLINE TO FLAT0.250 INCHES NOMINAL IN
FLANGE THICKNESS0.120 INCHES NOMINAL IN
STYLE DESIGNATORFLANGED
DIAMETER0.172 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
DISTANCE FROM CENTERLINE TO SECOND FLAT0.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEROUND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GH15A33?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GH15A33?
GH15A33 is a STANDOFF,THREADED,SPACING.
What is the NSN for GH15A33?
GH15A33 is cataloged in the U.S. Government catalog under NSN 5340-01-024-7162. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GH15A33

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.