Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW
The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.688 INCHES NOMINAL IN, connection_style: SWIVEL NUT FLARE FIRST END. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-200-7938, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
GH12G0074F
NSN:4720-01-200-7938 FSC:4720 CAGE:26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
seat_angle
37.0 DEGREES FIRST END
temp_rating
-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class
3B FIRST END
connection_type
THREADED INTERNAL TUBE FIRST END
inside_diameter
0.688 INCHES NOMINAL IN
connection_style
SWIVEL NUT FLARE FIRST END
outside_diameter
0.938 INCHES NOMINAL IN
thread_direction
RIGHT-HAND FIRST END
operating_pressure
1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure
3750.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size
1.062 INCHES FIRST END IN
end_connection_design
STRAIGHT FIRST END
NSN
4720-01-200-7938
COMPONENT DIAGRAM
KEY FEATURES
•
OUTSIDE DIAMETER: 0.938 INCHES NOMINAL IN
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
THREAD CLASS: 3B FIRST END
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
MINIMUM INSIDE BENDING RADIUS: 4.500 INCHES IN
•
BURST TEST PRESSURE: 3750.0 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER
0.938 INCHES NOMINAL IN
END CONNECTION DESIGN
STRAIGHT FIRST END
CONNECTION STYLE
SWIVEL NUT FLARE FIRST END
CONNECTION TYPE
THREADED INTERNAL TUBE FIRST END
THREAD CLASS
3B FIRST END
THREAD DIRECTION
RIGHT-HAND FIRST END
MINIMUM INSIDE BENDING RADIUS
4.500 INCHES IN
BURST TEST PRESSURE
3750.0 POUNDS PER SQUARE INCH LBS
TEMP RATING
-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GH12G0074F?
GH12G0074F is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace GH12G0074F?
There are 16 known substitutes for GH12G0074F: GH12G, MIL-DTL-83796/1, M83796/1E067A and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GH12G0074F?
GH12G0074F is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-200-7938. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.