PartsTable
Technical Data Sheet
PartsTable / COMPONENT / GH00-04
GH00-04 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hardness_rating: 50.0 SHORE DUROMETER A NOMINAL OVERALL, outside_diameter: 2.125 INCHES NOMINAL IN, aperture_diameter: 0.188 INCHES NOMINAL IN, cross-sectional_thickness: 0.125 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-012-3695, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GH00-04
NSN: 5330-01-012-3695
FSC: 5330
CAGE: 53553 — AMETEK INC SCHUTTE AND KOERTING DIV (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating50.0 SHORE DUROMETER A NOMINAL OVERALL
outside_diameter2.125 INCHES NOMINAL IN
aperture_diameter0.188 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classification7992 FSCM 53553 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-012-3695
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GH00-04 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 50.0 SHORE DUROMETER A NOMINAL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 7992 FSCM 53553 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
APERTURE DIAMETER: 0.188 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
OUTSIDE DIAMETER: 2.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING50.0 SHORE DUROMETER A NOMINAL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION7992 FSCM 53553 MFR REF SINGLE MATERIAL RESPONSE OVERALL
APERTURE DIAMETER0.188 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
OUTSIDE DIAMETER2.125 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
804228Interchangeable
interchangeable cross-reference
interchangeable
1-4X7-8X364Interchangeable
interchangeable cross-reference
interchangeable
430771Interchangeable
interchangeable cross-reference
interchangeable
10424482Interchangeable
interchangeable cross-reference
interchangeable
B8223516Interchangeable
interchangeable cross-reference
interchangeable
10B08Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy GH00-04?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GH00-04?
GH00-04 is a GASKET.
What parts can replace GH00-04?
There are 9 known substitutes for GH00-04: 804228, 1-4X7-8X364, 430771 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GH00-04?
GH00-04 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-012-3695. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GH00-04

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026