PartsTable
Technical Data Sheet
PartsTable / COMPONENT / GGG-T-0030 TY2SZ14
GGG-T-0030 TY2SZ14 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The STAPLE is a the manufacturer industrial component. Key specifications include material: STEEL, stock_shape: ROUND, fastener_length: 0.438 INCHES NOMINAL IN, special_features: WITH CROWN TOP STAPLE; FASTNER WIDTH 0.187IN. NOM; USE WITH TACKER NSN 5120-00-542-4144 IN, surface_treatment: ZINC OR TIN, surface_treatment_location: OVERALL.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-392-9124, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GGG-T-0030 TY2SZ14
NSN: 5315-01-392-9124
FSC: 5315
CAGE: 80244 — GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE (USA)
SPECIFICATIONS
materialSTEEL
stock_shapeROUND
fastener_length0.438 INCHES NOMINAL IN
special_featuresWITH CROWN TOP STAPLE; FASTNER WIDTH 0.187IN. NOM; USE WITH TACKER NSN 5120-00-542-4144 IN
surface_treatmentZINC OR TIN
surface_treatment_locationOVERALL
NSN5315-01-392-9124
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: GGG-T-0030 TY2SZ14 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STOCK SHAPE: ROUND
•
FASTENER LENGTH: 0.438 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
SURFACE TREATMENT: ZINC OR TIN
•
SURFACE TREATMENT LOCATION: OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STOCK SHAPEROUND
FASTENER LENGTH0.438 INCHES NOMINAL IN
MATERIALSTEEL
SURFACE TREATMENTZINC OR TIN
SURFACE TREATMENT LOCATIONOVERALL
SPECIAL FEATURESWITH CROWN TOP STAPLE; FASTNER WIDTH 0.187IN. NOM; USE WITH TACKER NSN 5120-00-542-4144 IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
T015Interchangeable
interchangeable cross-reference
interchangeable
GGG-T-0030 TY1Interchangeable
interchangeable cross-reference
interchangeable
TL610UInterchangeable
interchangeable cross-reference
interchangeable
5120-00-769-8706Interchangeable
interchangeable cross-reference
interchangeable
TB2Interchangeable
interchangeable cross-reference
interchangeable
GGG-T-0030Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy GGG-T-0030 TY2SZ14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GGG-T-0030 TY2SZ14?
GGG-T-0030 TY2SZ14 is a STAPLE.
What parts can replace GGG-T-0030 TY2SZ14?
There are 16 known substitutes for GGG-T-0030 TY2SZ14: T015, GGG-T-0030 TY1, TL610U and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GGG-T-0030 TY2SZ14?
GGG-T-0030 TY2SZ14 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-392-9124. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GGG-T-0030 TY2SZ14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026