PartsTable
Technical Data Sheet
Download PDF

GGG-S-1808 — SCREWDRIVER,JEWELER'S,SWIVEL KNO

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

GGG-S-1808: SCREWDRIVER,JEWELER'S,SWIVEL KNO.

SCREWDRIVER,JEWELER'S,SWIVEL KNO. Key specifications include width: 0.040 INCHES NOMINAL IN, tip_type: FLAT TIP, tip_width: 0.080 INCHES NOMINAL IN, handle_length: 2.750 INCHES MINIMUM IN, overall_length: 4.750 INCHES NOMINAL IN, shank_diameter: 0.100 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5120-00-180-0705, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GGG-S-1808
NSN: 5120-00-180-0705
NIINs: 001800705, 001800706, 001800727, 001800728, 001800729, 001800730, 001800887, 002888739, 002932050, 002932051, 002932052, 002932055, 002932056, 004462860, 005857878, 010604257, 010604258, 010604259, 010608051, 010609242, 010609243, 011192570, 011563433
FSC: 5120 — Hand Tools, Nonedged, Nonpowered
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
width0.040 INCHES NOMINAL IN
tip_typeFLAT TIP
tip_width0.080 INCHES NOMINAL IN
handle_length2.750 INCHES MINIMUM IN
blade_quantity2
overall_length4.750 INCHES NOMINAL IN
shank_diameter0.100 INCHES NOMINAL IN
furnished_itemsPLASTIC POUCH OR STORAGE CASE
drive_shank_typeMALE FLATTED ROUND
special_featuresSELF-ADJUSTING SCREW HOLDING JAWS
features_providedREPLACEABLE BLADE
component_quantity7
NSN5120-00-180-0705
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available SCREWDRIVER,JEWELER'S,SWIVEL KNO TITLE COMPONENT PN GGG-S-1808 MFR SCREWDRIVER,JEWELER'S,
KEY FEATURES
•
HANDLE LENGTH: 2.750 INCHES MINIMUM IN
•
FEATURES PROVIDED: REPLACEABLE BLADE
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE
•
TIP WIDTH: 0.025 INCHES NOMINAL IN
•
BLADE QUANTITY: 1
TECHNICAL CHARACTERISTICS
HANDLE LENGTH2.750 INCHES MINIMUM IN
FEATURES PROVIDEDREPLACEABLE BLADE
NONDEFINITIVE SPEC/STD DATA1 TYPE
TIP WIDTH0.025 INCHES NOMINAL IN
BLADE QUANTITY1
SPECIAL FEATURESMETAL HANDLE
SUBSTITUTES & CROSS-REFERENCES 4
07276109Same NSN cross-reference
Screwdriver,jeweler's,swivel Kno
Also cataloged under this NSN
A-A-3152Reference document
Screwdriver,jeweler's,swivel Kno
Reference document — Identification reference
7026A11Same NSN cross-reference
Screwdriver,jeweler's,swivel Kno
Also cataloged under this NSN
GGG-S-1808 TY1Reference document
Screwdriver,jeweler's,swivel Kno
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy GGG-S-1808?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GGG-S-1808?
GGG-S-1808 is a SCREWDRIVER,JEWELER'S,SWIVEL KNO.
What parts can replace GGG-S-1808?
There are 4 known substitutes for GGG-S-1808: 07276109, A-A-3152, 7026A11 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GGG-S-1808?
GGG-S-1808 is cataloged in the U.S. Government catalog under NSN 5120-00-180-0705. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GGG-S-1808

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.