PartsTable
Technical Data Sheet
PartsTable / COMPONENT / GGG-D-777B STYLE D TABLE IV

GGG-D-777B STYLE D TABLE IV — Technical Data Sheet

✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,DRIVE,POWER ACTUATED is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shank_length: 1.250 INCHES NOMINAL1.250 INCHES NOMINAL IN, thread_class: 3A3A, thread_length: 1.000 INCHES NOMINAL1.000 INCHES NOMINAL IN, overall_length: 2.250 INCHES NOMINAL2.250 INCHES NOMINAL IN, shank_diameter: 0.156 INCHES NOMINAL0.156 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5315-00-663-0018, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GGG-D-777B STYLE D TABLE IV
NSN: 5315-00-663-0018
FSC: 5315
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
shank_length1.250 INCHES NOMINAL1.250 INCHES NOMINAL IN
thread_class3A3A
thread_length1.000 INCHES NOMINAL1.000 INCHES NOMINAL IN
overall_length2.250 INCHES NOMINAL2.250 INCHES NOMINAL IN
shank_diameter0.156 INCHES NOMINAL0.156 INCHES NOMINAL IN
style_designatorPOWDER ACTUATED
thread_directionRIGHT-HANDRIGHT-HAND
nominal_thread_size0.250 INCHES0.250 INCHES IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
material_for_which_designedCONCRETE AND CONCRETE AND MASONRYMASONRY
NSN5315-00-663-0018
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: GGG-D-777B STYLE D TABLE IV · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 3A3A
•
THREAD DIRECTION: RIGHT-HANDRIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES0.250 INCHES IN
•
THREAD LENGTH: 1.000 INCHES NOMINAL1.000 INCHES NOMINAL IN
•
SHANK LENGTH: 1.250 INCHES NOMINAL1.250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: POWDER ACTUATED
TECHNICAL CHARACTERISTICS
THREAD CLASS3A3A
THREAD DIRECTIONRIGHT-HANDRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES0.250 INCHES IN
THREAD LENGTH1.000 INCHES NOMINAL1.000 INCHES NOMINAL IN
OVERALL LENGTH2.250 INCHES NOMINAL2.250 INCHES NOMINAL IN
SHANK LENGTH1.250 INCHES NOMINAL1.250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORPOWDER ACTUATED
SHANK DIAMETER0.156 INCHES NOMINAL0.156 INCHES NOMINAL IN
MATERIAL FOR WHICH DESIGNEDCONCRETE AND CONCRETE AND MASONRYMASONRY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
2411InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
GGGD777InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1377-M140InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
3-23InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
622WInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
2-222InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy GGG-D-777B STYLE D TABLE IV?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GGG-D-777B STYLE D TABLE IV?
GGG-D-777B STYLE D TABLE IV is a PIN,DRIVE,POWER ACTUATED.
What parts can replace GGG-D-777B STYLE D TABLE IV?
There are 21 known substitutes for GGG-D-777B STYLE D TABLE IV: 2411, GGGD777, 1377-M140 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GGG-D-777B STYLE D TABLE IV?
GGG-D-777B STYLE D TABLE IV is cataloged in the Federal Logistics Information System under NSN 5315-00-663-0018. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GGG-D-777B STYLE D TABLE IV

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026