PartsTable
Technical Data Sheet
GGG-C-111 TY4CL1 ✓ Verified by PartsTable
· STORAGE_HDD · 3.5_SATA_HDD
WHAT YOU NEED TO KNOW
SAS backplane supports SATA, not vice versa NL-SAS = SAS protocol at nearline (7.2K) speed — NOT SATA
Gen8 LFF tray ≠ Gen10 tray — different screw holes
PRODUCT OVERVIEW

IBM V7000 600 GB 2.5-inch 10K HDD. Key specifications include base_width: 3.812 INCHES NOMINAL IN, base_length: 5.812 INCHES NOMINAL IN, gaging_range: +0.000 TO 12.000 INCHES IN, indicator_type: VERNIER, special_features: SLOTTED BASE, nondefinitive_spec/std_data: IV TYPE AND 1 CLASS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5210-00-132-5689, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD 3.5_SATA_HDD GGG-C-111 TY4CL1
NSN: 5210-00-132-5689
FSC: 5210
CAGE: 80244 — GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE (USA)
SPECIFICATIONS
base_width3.812 INCHES NOMINAL IN
base_length5.812 INCHES NOMINAL IN
gaging_range+0.000 TO 12.000 INCHES IN
indicator_typeVERNIER
special_featuresSLOTTED BASE
nondefinitive_spec/std_dataIV TYPE AND 1 CLASS
departure_from_cited_designatorFEAT
minimum_vernier_graduation_unit0.001 INCHES IN
accessory_components_and_quantityGAGE,DEPTH 1
NSN5210-00-132-5689
COMPONENT DIAGRAM
RELEASE LATCH 600GB NL-SAS 10K RPM GGG-C-111 TY4CL1 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | 600GB | NL-SAS 10K RPM NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN GGG-C-111 TY4CL1 MFR OEM
KEY FEATURES
600GB Capacity
10K RPM Speed
NONDEFINITIVE SPEC/STD DATA: IV TYPE AND 4 CLASS
MINIMUM VERNIER GRADUATION UNIT: 0.001 INCHES IN
TYPICAL APPLICATIONS
  • Enterprise storage arrays and SANs
  • Direct-attached storage (DAS) expansion
  • Database tier storage (OLTP, OLAP)
  • Virtual machine datastore expansion
  • Backup-to-disk and disaster recovery targets
  • Content delivery and media streaming storage
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATAIV TYPE AND 4 CLASS
MINIMUM VERNIER GRADUATION UNIT0.001 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
254EMZ-24Interchangeable
interchangeable cross-reference
interchangeable
GGG-C-111 TY6CL3Interchangeable
interchangeable cross-reference
interchangeable
GGG-C-111Interchangeable
interchangeable cross-reference
interchangeable
6417Interchangeable
interchangeable cross-reference
interchangeable
1417Interchangeable
interchangeable cross-reference
interchangeable
FFB171Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy GGG-C-111 TY4CL1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GGG-C-111 TY4CL1?
GGG-C-111 TY4CL1 is a IBM V7000 600 GB 2.5-inch 10K HDD. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace GGG-C-111 TY4CL1?
There are 23 known substitutes for GGG-C-111 TY4CL1: 254EMZ-24, GGG-C-111 TY6CL3, GGG-C-111 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GGG-C-111 TY4CL1?
GGG-C-111 TY4CL1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5210-00-132-5689. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GGG-C-111 TY4CL1