GF511J3-6 — RIVET,BLIND

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

GF511J3-6: RIVET,BLIND.

The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 SLEEVE, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, lubrication: DRY FILM, shank_style: SELF-PLUGGING, shank_diameter: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-222-3313, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

GF511J3-6

NSN: 5320-01-222-3313
FSC: 5320 — Rivets
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)

SPECIFICATIONS

material	IRON ALLOY 660 SLEEVE
head_style	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
grip_length	0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
lubrication	DRY FILM
shank_style	SELF-PLUGGING
shank_diameter	0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
hardness_rating	48.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM STEM
expansion_device	SERRATED STEM-TYPE W
countersink_angle	100.0 DEGREES NOMINAL
surface_treatment	PASSIVATE SLEEVE
head_major_diameter	0.3016 INCHES MAXIMUM IN
minimum_tensile_strength	140000 POUNDS PER SQUARE INCH LBS
NSN	5320-01-222-3313

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN

•

LUBRICATION: DRY FILM

•

EXPANSION DEVICE: SERRATED STEM-TYPE W

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE

•

HARDNESS RATING: 48.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM STEM

•

HEAD STYLE: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)

•

GRIP LENGTH: 0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN

•

SHANK STYLE: SELF-PLUGGING

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
LUBRICATION	DRY FILM
EXPANSION DEVICE	SERRATED STEM-TYPE W
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE
HARDNESS RATING	48.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM STEM
HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
GRIP LENGTH	0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
SHANK STYLE	SELF-PLUGGING
SURFACE TREATMENT	PASSIVATE SLEEVE
MINIMUM TENSILE STRENGTH	140000 POUNDS PER SQUARE INCH LBS

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES 1

X-ISP100-EU06-6Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy GF511J3-6?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is GF511J3-6?

GF511J3-6 is a RIVET,BLIND.

What parts can replace GF511J3-6?

There is 1 known substitute for GF511J3-6: X-ISP100-EU06-6. Substitute compatibility should be verified for your specific system.

What is the NSN for GF511J3-6?

GF511J3-6 is cataloged in the U.S. Government catalog under NSN 5320-01-222-3313. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

GF511J3-6 — RIVET,BLIND

Request a Quote — GF511J3-6