PartsTable
Technical Data Sheet
Download PDF

GE144 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

GE144: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.812 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.750 INCHES NOMINAL IN, bolt_circle_diameter: 2.938 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-247-4171, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GE144
NSN: 5330-00-247-4171
FSC: 5330 — Packing and Gasket Materials
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.812 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter1.750 INCHES NOMINAL IN
bolt_hole_quantity2
bolt_circle_diameter2.938 INCHES NOMINAL IN
outside_corner_radius0.438 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center1.250 INCHES NOMINAL IN
material_document_and_classificationHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-247-4171
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GE144 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 1.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.750 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 2
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER1.250 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH3.812 INCHES NOMINAL IN
APERTURE DIAMETER1.750 INCHES NOMINAL IN
BOLT HOLE QUANTITY2
BOLT CIRCLE DIAMETER2.938 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.438 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
4030481Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
DP481Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy GE144?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GE144?
GE144 is a GASKET.
What parts can replace GE144?
There are 2 known substitutes for GE144: 4030481, DP481. Substitute compatibility should be verified for your specific system.
What is the NSN for GE144?
GE144 is cataloged in the U.S. Government catalog under NSN 5330-00-247-4171. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GE144