PartsTable
Technical Data Sheet
Download PDF

GCP-766-46 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

GCP-766-46: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY R-405 OVERALL, nut_style: HEXAGON, nut_height: 0.216 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-297-8833, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GCP-766-46
NSN: 5310-00-297-8833
FSC: 5310 — Nuts and Washers
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialNICKEL ALLOY R-405 OVERALL
nut_styleHEXAGON
nut_height0.216 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
width_across_flats0.669 INCHES MINIMUM AND 0.688 INCHES MAXIMUM IN
nominal_thread_size0.375 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch16
nondefinitive_spec/std_data4 TYPE AND A STYLE AND B STYLE
material_document_and_classificationQQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-297-8833
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: GCP-766-46 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.669 INCHES MINIMUM AND 0.688 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 4 TYPE AND A STYLE AND B STYLE
•
NUT HEIGHT: 0.216 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.669 INCHES MINIMUM AND 0.688 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
NONDEFINITIVE SPEC/STD DATA4 TYPE AND A STYLE AND B STYLE
NUT HEIGHT0.216 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD CLASS3B
THREAD QUANTITY PER INCH16
SUBSTITUTES & CROSS-REFERENCES 6
MILB857TYPE4STYLEA0RBReference document
Same NSN cross-reference
Reference document — Secondary reference
3/8-16UNCReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
830-0375-320Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MIL-S-1222Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-DTL-1222Reference document
Same NSN cross-reference
Reference document — Identification reference
12143Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy GCP-766-46?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GCP-766-46?
GCP-766-46 is a NUT,PLAIN,HEXAGON.
What parts can replace GCP-766-46?
There are 6 known substitutes for GCP-766-46: MILB857TYPE4STYLEA0RB, 3/8-16UNC, 830-0375-320 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GCP-766-46?
GCP-766-46 is cataloged in the U.S. Government catalog under NSN 5310-00-297-8833. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GCP-766-46