PartsTable
Technical Data Sheet
Download PDF

GC842E60C — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

GC842E60C: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.250 INCHES NOMINAL IN, length: 0.172 INCHES NOMINAL IN, material: COPPER ALLOY 260 OVERALL, hole_diameter: 0.065 INCHES NOMINAL IN, overall_height: 0.247 INCHES NOMINAL IN, surface_treatment: SILVER OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-412-9957, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GC842E60C
NSN: 5340-00-412-9957
FSC: 5340 — Hardware, Commercial
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
width0.250 INCHES NOMINAL IN
length0.172 INCHES NOMINAL IN
materialCOPPER ALLOY 260 OVERALL
hole_diameter0.065 INCHES NOMINAL IN
overall_height0.247 INCHES NOMINAL IN
surface_treatmentSILVER OVERALL
material_thickness0.010 INCHES NOMINAL IN
loop/holding_dimension0.140 INCHES NOMINAL IN
distance_from_loop_center_to_end0.140 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-412-9957
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GC842E60C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.172 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.140 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.010 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.140 INCHES NOMINAL IN
•
SURFACE TREATMENT: SILVER OVERALL
•
WIDTH: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.247 INCHES NOMINAL IN
LENGTH0.172 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.140 INCHES NOMINAL IN
MATERIAL THICKNESS0.010 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.140 INCHES NOMINAL IN
SURFACE TREATMENTSILVER OVERALL
WIDTH0.250 INCHES NOMINAL IN
MATERIALCOPPER ALLOY 260 OVERALL
HOLE DIAMETER0.065 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
6000-2CReference document
Same NSN cross-reference
Reference document — Design control — primary reference
5340004129957Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy GC842E60C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GC842E60C?
GC842E60C is a CLIP,SPRING TENSION.
What parts can replace GC842E60C?
There are 2 known substitutes for GC842E60C: 6000-2C, 5340004129957. Substitute compatibility should be verified for your specific system.
What is the NSN for GC842E60C?
GC842E60C is cataloged in the U.S. Government catalog under NSN 5340-00-412-9957. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GC842E60C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.