PartsTable
Technical Data Sheet
Download PDF

GC842E14C — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

GC842E14C: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, length: 0.656 INCHES NOMINAL IN, material: COPPER ALLOY 172 OVERALL, hole_diameter: 0.128 INCHES NOMINAL IN, overall_height: 0.760 INCHES NOMINAL IN, surface_treatment: SILVER OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-964-1220, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GC842E14C
NSN: 5340-00-964-1220
FSC: 5340 — Hardware, Commercial
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL IN
length0.656 INCHES NOMINAL IN
materialCOPPER ALLOY 172 OVERALL
hole_diameter0.128 INCHES NOMINAL IN
overall_height0.760 INCHES NOMINAL IN
surface_treatmentSILVER OVERALL
material_thickness0.014 INCHES NOMINAL IN
loop/holding_dimension0.625 INCHES NOMINAL IN
specification/standard_data26512-GC842E14C MANUFACTURERS SPECIFICATION
distance_from_loop_center_to_end0.431 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-964-1220
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GC842E14C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.656 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.625 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.014 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 26512-GC842E14C MANUFACTURERS SPECIFICATION
•
DISTANCE FROM LOOP CENTER TO END: 0.431 INCHES NOMINAL IN
•
SURFACE TREATMENT: SILVER OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.760 INCHES NOMINAL IN
LENGTH0.656 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.625 INCHES NOMINAL IN
MATERIAL THICKNESS0.014 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA26512-GC842E14C MANUFACTURERS SPECIFICATION
DISTANCE FROM LOOP CENTER TO END0.431 INCHES NOMINAL IN
SURFACE TREATMENTSILVER OVERALL
WIDTH1.000 INCHES NOMINAL IN
MATERIALCOPPER ALLOY 172 OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
990012-25Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
6016-14CReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GC842E14C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GC842E14C?
GC842E14C is a CLIP,SPRING TENSION.
What parts can replace GC842E14C?
There are 2 known substitutes for GC842E14C: 990012-25, 6016-14C. Substitute compatibility should be verified for your specific system.
What is the NSN for GC842E14C?
GC842E14C is cataloged in the U.S. Government catalog under NSN 5340-00-964-1220. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GC842E14C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.