PartsTable
Technical Data Sheet
Download PDF

GC502A24A — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

GC502A24A: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, material: ALUMINUM ALLOY BAND, overall_width: 1.390 INCHES MINIMUM AND 1.410 INCHES MAXIMUM IN, style_designator: HINGED & CENTER MTD, surface_treatment: ANODIZE BAND, material_thickness: 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-031-3117, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GC502A24A
NSN: 5340-00-031-3117
FSC: 5340 — Hardware, Commercial
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
diameter0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
materialALUMINUM ALLOY BAND
overall_width1.390 INCHES MINIMUM AND 1.410 INCHES MAXIMUM IN
style_designatorHINGED & CENTER MTD
surface_treatmentANODIZE BAND
material_thickness0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
loop_inside_diameter1.520 INCHES MINIMUM AND 1.540 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end1.663 INCHES NOMINAL IN
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE BAND
center_to_center_distance_between_loop_and_mounting_hole1.413 INCHES NOMINAL IN
NSN5340-00-031-3117
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GC502A24A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE BAND
•
STYLE DESIGNATOR: HINGED & CENTER MTD
•
DIAMETER: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.663 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.413 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE BAND
STYLE DESIGNATORHINGED & CENTER MTD
DIAMETER0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
OVERALL WIDTH1.390 INCHES MINIMUM AND 1.410 INCHES MAXIMUM IN
MATERIAL THICKNESS0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.663 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.413 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY BAND
LOOP INSIDE DIAMETER1.520 INCHES MINIMUM AND 1.540 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GC502A24A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GC502A24A?
GC502A24A is a CLAMP,LOOP.
What is the NSN for GC502A24A?
GC502A24A is cataloged in the U.S. Government catalog under NSN 5340-00-031-3117. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GC502A24A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.