GC500B — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

GC500B: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER CUSHION, overall_width: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.025 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-326-9602, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

GC500B

NSN: 5340-01-326-9602
FSC: 5340 — Hardware, Commercial
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)

SPECIFICATIONS

diameter	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
material	PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER CUSHION
overall_width	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
style_designator	SINGLE LOOP
tongue_hole_type	ROUND, UNTHREADED
material_thickness	0.025 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
loop_inside_diameter	0.188 INCHES NOMINAL IN
material_document_and_classification	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end	0.873 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole	0.483 INCHES MINIMUM AND 0.513 INCHES MAXIMUM IN
NSN	5340-01-326-9602

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND

•

DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.025 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.873 INCHES NOMINAL IN

•

TONGUE HOLE TYPE: ROUND, UNTHREADED

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.483 INCHES MINIMUM AND 0.513 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
DIAMETER	0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH	0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.025 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.873 INCHES NOMINAL IN
TONGUE HOLE TYPE	ROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.483 INCHES MINIMUM AND 0.513 INCHES MAXIMUM IN
MATERIAL	STEEL COMP 321 BAND
MATERIAL	PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER CUSHION

SUBSTITUTES & CROSS-REFERENCES 1

11121-3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy GC500B?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is GC500B?

GC500B is a CLAMP,LOOP.

What parts can replace GC500B?

There is 1 known substitute for GC500B: 11121-3. Substitute compatibility should be verified for your specific system.

What is the NSN for GC500B?

GC500B is cataloged in the U.S. Government catalog under NSN 5340-01-326-9602. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

GC500B — CLAMP,LOOP

Request a Quote — GC500B