PartsTable / COMPONENT / GC1542
GC1542
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN, housing_bore_diameter: 0.999 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 0.437 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-768-5353, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
GC1542
NSN: 5330-00-768-5353 FSC: 5330 CAGE: 70763 — CONCENTRIC ROCKFORD INC (USA)
SPECIFICATIONS
material RUBBER SYNTHETIC SEALING ELEMENT case_style SQUARE seal_width 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN housing_bore_diameter 0.999 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 0.437 INCHES NOMINAL IN NSN 5330-00-768-5353
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: GC1542
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEALING ELEMENT STYLE: ANGULAR
• SEAL WIDTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
• HOUSING BORE DIAMETER: 0.999 INCHES NOMINAL IN
• ACCOMMODATED SHAFT DIAMETER: 0.437 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLE ANGULAR SEAL WIDTH 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN CASE STYLE SQUARE MATERIAL STEEL CASE MATERIAL RUBBER SYNTHETIC SEALING ELEMENT HOUSING BORE DIAMETER 0.999 INCHES NOMINAL IN ACCOMMODATED SHAFT DIAMETER 0.437 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
7604 Interchangeable interchangeable cross-reference
interchangeable
00044 Interchangeable interchangeable cross-reference
interchangeable
998J Interchangeable interchangeable cross-reference
interchangeable
DDDP54 Interchangeable interchangeable cross-reference
interchangeable
4702247-0 Interchangeable interchangeable cross-reference
interchangeable
70141 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy GC1542?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GC1542?
GC1542 is a SEAL,PLAIN ENCASED.
What parts can replace GC1542?
There are 9 known substitutes for GC1542: 7604, 00044, 998J and 6 more. Substitute compatibility should be verified for your specific system.
Is GC1542 still available?
GC1542 is currently cancelled.