PartsTable
Technical Data Sheet
Download PDF

GC-5 — GC-5

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

GC-5: GC-5.

The GC-5 is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY BODY AND CONTACT, design_type: THREADED, jaw_opening: 1.562 INCHES NOMINAL IN, thread_class: 2A A, overall_width: 7.188 INCHES NOMINAL IN, overall_height: 11.344 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-005-8233, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ GC-5
NSN: 5340-00-005-8233
NIINs: 000058233, 004916750, 014574399
FSC: 5340 — Hardware, Commercial
CAGE: 99017 — CAPLUGS LLC DBA MOKON DIV CAPLUGS (USA)
SPECIFICATIONS
materialCOPPER ALLOY BODY AND CONTACT
design_typeTHREADED
jaw_opening1.562 INCHES NOMINAL IN
thread_class2A A
overall_width7.188 INCHES NOMINAL IN
overall_height11.344 INCHES NOMINAL IN
overall_length10.375 INCHES NOMINAL IN
mounting_methodTERMINAL
overall_diameter0.688 INCHES NOMINAL IN
special_featuresBCI GROUP GC2; ASSEMBLY NUMBER 2; COLD CRANKING AMPS 000; RESERVE MINUTES CAPACITY 135; BATTERY TYPE LEAD ACID; DOT CLASS 8; DOT LABEL CORROSIVE
style_designatorFINE WIRE CLIP
voltage_in_volts6.0
NSN5340-00-005-8233
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GC-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: THREADED
•
OVERALL DIAMETER: 0.688 INCHES NOMINAL IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.312 INCHES NOMINAL IN
•
THREAD CLASS: 2A A
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 1/2-20 UNF
•
ROUND CAP OUTSIDE SURFACE CONDITION: KNURLED
TECHNICAL CHARACTERISTICS
DESIGN TYPETHREADED
OVERALL DIAMETER0.688 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.312 INCHES NOMINAL IN
THREAD CLASS2A A
END ITEM IDENTIFICATIONMRAP - COUGAR CAT1 A1
MATERIALPLASTIC, POLYETHYLENE (PP)
THREAD SIZE AND SERIES/TYPE DESIGNATOR1/2-20 UNF
ROUND CAP OUTSIDE SURFACE CONDITIONKNURLED
SUBSTITUTES & CROSS-REFERENCES 2
904768-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
B391Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy GC-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GC-5?
GC-5 is a GC-5. It is classified as a MRO (MRO_GENERAL).
What parts can replace GC-5?
There are 2 known substitutes for GC-5: 904768-1, B391. Substitute compatibility should be verified for your specific system.
What is the NSN for GC-5?
GC-5 is cataloged in the U.S. Government catalog under NSN 5340-00-005-8233. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GC-5