PartsTable
Technical Data Sheet
PartsTable / COMPONENT / GB95
GB95 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include bore_diameter: 0.5625 INCHES NOMINAL IN, overall_width: 0.3125 INCHES NOMINAL IN, alignment_type: RIGID, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL, overall_outside_diameter: 0.7500 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-277-0539, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GB95
NSN: 3110-00-277-0539
FSC: 3110
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
bore_diameter0.5625 INCHES NOMINAL IN
overall_width0.3125 INCHES NOMINAL IN
alignment_typeRIGID
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter0.7500 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-277-0539
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: GB95 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.5625 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
OVERALL OUTSIDE DIAMETER: 0.7500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.5625 INCHES NOMINAL IN
OVERALL WIDTH0.3125 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OVERALL OUTSIDE DIAMETER0.7500 INCHES NOMINAL IN
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
100300Interchangeable
interchangeable cross-reference
interchangeable
1003000Interchangeable
interchangeable cross-reference
interchangeable
144635-1Interchangeable
interchangeable cross-reference
interchangeable
433030-1Interchangeable
interchangeable cross-reference
interchangeable
721798-35Interchangeable
interchangeable cross-reference
interchangeable
KW1088-237-11PHInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy GB95?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GB95?
GB95 is a BEARING,ROLLER,NEEDLE.
What parts can replace GB95?
There are 14 known substitutes for GB95: 100300, 1003000, 144635-1 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GB95?
GB95 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-277-0539. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GB95

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026