PartsTable
Technical Data Sheet
Download PDF

GB510DE412D — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

GB510DE412D: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP H11 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN, head_diameter: 0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-134-8728, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GB510DE412D
NSN: 5305-01-134-8728
FSC: 5305 — Screws
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP H11 OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN
head_diameter0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
thread_length0.351 INCHES MINIMUM AND 0.418 INCHES MAXIMUM IN
fastener_length1.111 INCHES MINIMUM AND 1.158 INCHES MAXIMUM IN
hardness_rating51.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatmentCADMIUM AND CHROMATE OVERALL
NSN5305-01-134-8728
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: GB510DE412D · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.111 INCHES MINIMUM AND 1.158 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-8837 TYPE 2 CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.351 INCHES MINIMUM AND 0.418 INCHES MAXIMUM IN
•
HARDNESS RATING: 51.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL
•
SHANK UNTHREADED HOLE DIAMETER: 0.071 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
TECHNICAL CHARACTERISTICS
FASTENER LENGTH1.111 INCHES MINIMUM AND 1.158 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-8837 TYPE 2 CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.351 INCHES MINIMUM AND 0.418 INCHES MAXIMUM IN
HARDNESS RATING51.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL
SHANK UNTHREADED HOLE DIAMETER0.071 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
GB510CS4HD12Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GB510DE412D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GB510DE412D?
GB510DE412D is a SCREW,CLOSE TOLERANCE.
What parts can replace GB510DE412D?
There is 1 known substitute for GB510DE412D: GB510CS4HD12. Substitute compatibility should be verified for your specific system.
What is the NSN for GB510DE412D?
GB510DE412D is cataloged in the U.S. Government catalog under NSN 5305-01-134-8728. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GB510DE412D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.