PartsTable
Technical Data Sheet
Download PDF

GB510CH3V7LF — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

GB510CH3V7LF: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY UNS R54520 OVERALL, head_style: FLAT COUNTERSUNK, grip_length: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN, head_diameter: 0.325 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-151-8668, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GB510CH3V7LF
NSN: 5305-00-151-8668
FSC: 5305 — Screws
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialTITANIUM ALLOY UNS R54520 OVERALL
head_styleFLAT COUNTERSUNK
grip_length0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
head_diameter0.325 INCHES MINIMUM AND 0.387 INCHES MAXIMUM IN
thread_length0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES GRIP
fastener_length0.861 INCHES MINIMUM AND 0.891 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
internal_drive_styleHIGH-TORQUE
NSN5305-00-151-8668
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: GB510CH3V7LF · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES GRIP
•
FASTENER LENGTH: 0.861 INCHES MINIMUM AND 0.891 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: NAS621,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL V
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SPECIFICATION/STANDARD DATA: 26512-GB510F MANUFACTURERS STANDARD
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES GRIP
FASTENER LENGTH0.861 INCHES MINIMUM AND 0.891 INCHES MAXIMUM IN
THREAD LENGTH0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONNAS621,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL V
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SPECIFICATION/STANDARD DATA26512-GB510F MANUFACTURERS STANDARD
GRIP LENGTH0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
GRIP DIAMETER0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 5
HT8100-3-7Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
GB510CH3V7LESame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
T150-3-7Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
BM19024-3-7Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
66584-3-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GB510CH3V7LF?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GB510CH3V7LF?
GB510CH3V7LF is a SCREW,CLOSE TOLERANCE.
What parts can replace GB510CH3V7LF?
There are 5 known substitutes for GB510CH3V7LF: HT8100-3-7, GB510CH3V7LE, T150-3-7 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GB510CH3V7LF?
GB510CH3V7LF is cataloged in the U.S. Government catalog under NSN 5305-00-151-8668. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GB510CH3V7LF

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.