PartsTable
Technical Data Sheet
Download PDF

GB23K11C20 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

GB23K11C20: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_width: 0.063 INCHES NOMINAL IN, first_leg_length: 1.250 INCHES NOMINAL IN, style_designator: ANGLE, second_leg_length: 0.780 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-624-3540, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GB23K11C20
NSN: 5340-01-624-3540
FSC: 5340 — Hardware, Commercial
CAGE: 26512 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
first_leg_angle90.0 DEGREES NOMINAL
first_leg_width0.063 INCHES NOMINAL IN
first_leg_length1.250 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length0.780 INCHES NOMINAL IN
first_leg_thickness0.058 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
second_leg_thickness0.058 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
part_name_assigned_by_controlling_agencyCLAMP SUPPORT BRACKET ANGLE
NSN5340-01-624-3540
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GB23K11C20 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG LENGTH: 0.780 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
•
SECOND LEG THICKNESS: 0.058 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
•
FIRST LEG THICKNESS: 0.058 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
•
FIRST LEG LENGTH: 1.250 INCHES NOMINAL IN
•
FIRST LEG WIDTH: 0.063 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG LENGTH0.780 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
SECOND LEG THICKNESS0.058 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
FIRST LEG THICKNESS0.058 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
FIRST LEG LENGTH1.250 INCHES NOMINAL IN
FIRST LEG WIDTH0.063 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYCLAMP SUPPORT BRACKET ANGLE
MATERIALALUMINUM ALLOY 2024
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GB23K11C20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GB23K11C20?
GB23K11C20 is a BRACKET,ANGLE.
What is the NSN for GB23K11C20?
GB23K11C20 is cataloged in the U.S. Government catalog under NSN 5340-01-624-3540. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GB23K11C20

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.